Operation Manual

22
ENGLISH
Note:
7
If a back-up battery has not been
inserted, the time is automatically
reset by DCF time synchronisa-
tion as long as the DCF recep-
tion is strong enough. Alarm time
and time zone synchronisation
are each reset to the values
»00:00« and »00«. Please note
that, in this case, you may be
wakened at the wrong time.
Setting alarm time 1
1 Press »SET« twice.
– Display: the last alarm time set,
»AL 1 « and »:« flash al-
ternately.
2 Press »HOUR/VOL+« briefly to
set the hours step-by-step or hold
down to run through the hours
continuously.
3 Press »MIN/VOL-« briefly to set
the minutes step-by-step or hold
down to run through the minutes
continuously.
– The device saves the set alarm
time automatically after 10 se-
conds.
– Display: »AL 1 « lights up,
this means the alarm is activa-
ted.
– The device wakes you up at the
set time with the alarm signal of
your choice.
SETTINGS ________________________________________
Setting alarm time 2
1 Press »SET« three times.
– Display: the last alarm time set,
»AL 2 « and »:« flash alter-
nately.
2 Press »HOUR/VOL+« briefly to
set the hours step-by-step or hold
down to run through the hours
continuously.
3 Press »MIN/VOL-« briefly to set
the minutes step-by-step or hold
down to run through the minutes
continuously.
– The device saves the set alarm
time automatically after 10 se-
conds.
– Display: »AL 2 « lights up,
this means the alarm is activa-
ted.
– The device wakes you up at the
set time with the alarm signal of
your choice.