Operation Manual
ENGLISH
23
Note:
7
If no other button is pressed, the
device switches back automati-
cally to the current time after
10 seconds.
Alarm with radio station
1 Press » « to switch on the device.
2 Select the radio station using the
»-TUNING+« dial.
3 Adjust the alarm volume by pressing
»HOUR/VOL+« or »MIN/VOL-«.
4 Set the radio station you want as
an alarm signal (» «), and press
»AL1« or »AL 2« twice.
– Display: the corresponding LED
»AL 1 « or »AL 2 «
lights up.
5 Press » « to switch off the device.
– The device wakes you up at the
set time with the radio station
(alarm duration is 59 minutes).
Alarm with signal tone
1 Press » « to switch off the device.
2 Set the signal tone alarm signal
(» «), and press »AL 1« or »AL 2«
once.
– The device wakes you up at
the set time with the signal tone
(alarm duration is 59 minutes).
OPERATION _____________________________________
Switching on and off
1 Press » « to switch on the device
from standby mode.
2 Press » « to switch the device to
standby mode.
Radio mode
For the best possible FM (VHF) re-
ception, it is sufficient to align the
wire antenna accordingly.
Tuning to radio stations
1 Select the radio station using the
»-TUNING+« dial.
Adjusting the volume
1 Adjust the volume by pressing
»HOUR/VOL+« or »MIN/VOL-«.
Alarm mode
The device has a dynamic alarm tone
that starts at a low volume and reach-
es its maximum volume within 30 to
45 seconds.
Viewing the alarm time
1 Press »SET« twice (for alarm time
1) or three times (for alarm time 2).
– Display: the last set alarm time
1 or 2, the LED »AL 1 « or
»AL 2 « flashes.