Operation Manual

9
ENGLISH
OPERATION ______________________________
7
The browing degree of one slice is darker than
two slices, although the browning control
C
is
set to the same level.
4 Press the start lever
B
until it automatically
snaps into place.
– The toasting process begins. The indicator
light of the stop button
F
and the button
of the browning control level
C
illuminates
during the toasting process.
Notes
7
If the power plug is not connected to the wall
socket, the start lever
B
does not snap into
place.
7
The degree of browning can also be adjusted
during the toasting process with the browning
control
C
.
5 The appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever
B
springs back up and the
stop button
F
light goes off. The toast slices
are pushed upwards and can be taken out
of the toaster.
Notes
7
To cancel the toasting process before it has fin-
ished, press the stop button
F
. The start lever
B
springs back up and the toast slices can be
taken out of the toaster.
7
After the start lever
B
springs back up, you
can use the high-lift function by pushing the
start lever
B
upwards.
Caution
7
Be very careful when taking the toast slices out
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
6 Disconnect the appliance from the wall
socket.
Note
7
If toast slices get stuck in the toaster, switch the
toaster off immediately by pressing the stop
button
F
. Pull the power plug out of the wall
socket. Let the toaster cool down completely.
Carefully try to take the bread out of the toaster
without damaging the sensitive heating ele-
ments and other parts. Do not use any electro-
conductive objects to remove the bread from
the toaster.
Toasting frozen bread
1 Follow the steps from 1 to 4 of the “Toasting”
section.
2 Press the defrost button
E
.
– The indicator lights of the defrost button
E
and stop button
F
illuminate and the toast-
ing process begins.
Note
7
When the defrost button
E
is pressed, the
toasting process takes longer than with normal
toasting.
3 The appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever
B
springs back up; defrost
button
E
and the stop button
F
lights go
off. The toast slices are pushed upwards
and can be taken out of the toaster.
Notes
7
To cancel the toasting process before it has fin-
ished, press the stop button
F
. The start lever
B
springs back up and the toast slices can be
taken out of the toaster.
7
After the start lever
B
springs back up, you can
use high-lift function by pushing the start lever
B
upwards.
Caution
7
Be very careful when taking the toast slices out
of the toaster as the metal parts of the toaster
and also the bread can become very hot.