Operation Manual
26
ENGLISH
OPERATION________________________
1 Press On/Off and mode switch
B
to switch on the appliance.
– HIGH mode LED
D
lights up
blue and the appliance starts in
HIGH mode.
2 Press On/Off and mode switch
B
consecutively to select a mode.
– LOW mode LED
E
lights up
blue after pressing
B
once in
HIGH mode.
– MASSAGE mode LED
F
lights
up blue after pressing
B
twice
in HIGH mode.
3 Press On/Off and mode switch
B
to switch off the appliance,
regardless of the mode selected.
– The appliance switches off
after MASSAGE mode LED
F
disappears.
The 2 minute timer
Regardless of the mode selected, af-
ter 2 minutes the appliance switches
off automatically. Every 30 seconds
the appliance gives a vibration
signal for your timing.
Changing the
attachments
1 Remove the current attachment
from the holder by turning it in the
reverse direction of the arrows on
the attachment and the holder.
2 Take the other attachment out of
the storage container for brushing
and cleaning attachments
H
.
3 Place the attachment on the
holder. Make sure that the notches
of the holder match the attach-
ment. Turn the attachment in the
same direction of the arrows until
it fits well into place.
Note
■ Replace the brush head when
the bristles become bent and
distorted and the wear indicator
becomes brighter at the side.
We recommend you to do this
every 4 months.