VACUUM CLEANER VCC 4350 A EN
________________________________________________________ A Q P B C D O E N M F L K G J 3 H I
SAFETY______________________________________________ Please read this manual completely before using your appliance! Follow all the safety instructions to avoid damage caused by improper use! Please retain this user manual for further reference. This manual shall also be supplied with the appliance when the appliance is handed over to a third person. ▪ This appliance is intended for household use only. Warranty shall be void when the appliance is used for industrial or commercial purposes.
SAFETY______________________________________________ ▪ Always pull out the power cord before cleaning or carrying out any maintenance on the appliance. ▪ Whenever possible, insert the power cord plug directly into the socket. Avoid using extension cables or multipoint connectors. ▪ Pull out the power plug after use. Do not disconnect the plug by pulling on the cable. ▪ Never use the appliance if there is visible damage on the appliance or on the power cord.
OVERVIEW _________________________________________ Dear Customers, Congratulations on your purchase of your new vacuum cleaner VCC 4350 A. Read the following user notes carefully to ensure full enjoyment of your quality GRUNDIG product for many years to come. Controls and parts See the figure on page 3.
OPERATION________________________________________ Preparation Your appliance is provided with a dust bag. The appliance is ready for use when all parts are installed together. 1 Insert the flexible hose Q with the flexible contact into the inlet on the main body of the appliance until it latches in. Note ■ To remove the flexible hose Q press the side release buttons buttons on the flexible hose adapter D and then pull out the hose.
OPERATION________________________________________ Switching on and off 1 Pull the power cord out to a suitable length. Caution ■ The maximum cable length is indicated by a red mark. Never try to pull out the power cord beyond the red mark. 2 Plug the power cord plug into the wall socket. 3 Switch on the appliance by pressing On/Off button G . 4 Press On/Off button G to turn off the appliance after using it and remove the power cord from the outlet. Caution ■ Never unplug the appliance when it is in use.
INFORMATION_ ___________________________________ Dust bag full indicator 5 Insert a new dust bag in the holder. Dust bag full indicator O will provide a warning when the suction power is reduced when the thin pores of the dust bag are blocked by thin dust. It shall also indicate if a big object blocks the hose or suction clearance. 6 Close the dust container cover N. Note ■ You should use dust bags from Swirl®, Type Y 05® or Menalux®, Type 1840 for VCC 4350 A.
INFORMATION_ ___________________________________ Replacement or cleaning of the filter Caution ■ Install the dust bag and filter before operating the appliance; otherwise motor may be damaged. Clean the exhaust air fan filter 1 Remove the filter bracket by pressing on the release button (on the rear of the appliance). 2 Remove the filter from filter bracket. 3 Shake out the filter and wash with hot soapy water, rinse carefully and leave to air dry.
INFORMATION_ ___________________________________ Parking Feature Troubleshooting You can store your appliance by using less space when your appliance is in one of below parking positions. If you have problems with your appliance, these problems (reduced suction power, abnormal noise or breakdown) may be caused by blocked vacuuming tools or faulty electrical parts. 1 Check whether the vacuuming tools are blocked. 2 Check dust bag and motor protection filter.
INFORMATION_ ___________________________________ Environmental information This product is manufactured with high-quality parts and materials which can be reused and recycled. Therefore, do not dispose of the product with normal household waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. This is indicated by this symbol on the product, in the operating manual and on the packaging.
Grundig Intermedia GmbH Beuthener Strasse 41 D–90471 Nürnberg www.grundig.
