MULTI-CYCLONIC VACUUM CLEANER VCC 6270 C EN
________________________________________________________ F D P G Q O A B C D E F G H M L N R 3 S T K J U I V W
SAFETY_____________________________________ Please read this instruction manual thoroughly prior to using this appliance! Follow all safety instructions in order to avoid damages due to improper use! Keep the instruction manual for future reference. Should this appliance be given to a third party, then this instruction manual must also be handed over. ▪ Always keep hair, clothing and any other utensils away from the appliance during operation in order to prevent injury and damages.
SAFETY_____________________________________ ▪ Check if the mains voltage on the rating label corresponds to your local mains supply. The only way to disconnect the appliance from the mains is to pull out the plug. ▪ Always pull out the power cord before cleaning or carrying out any maintenance on the appliance. ▪ Whenever possible, insert the power cord plug directly into the socket. Avoid using extension cables or multipoint connectors.
SAFETY_____________________________________ ▪ The vacuum cleaner is very powerful; thus before plugging the cord into the wall socket, make sure the switch is in the ‘Off’ position. Hold the vacuum cleaner firmly when starting and while using it. ▪ If the inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockages before re-starting the vacuum cleaner. ▪ Washing filters improves vacuum performance.
AT A GLANCE_______________________________ Dear Customer, Controls and parts Congratulations on the purchase of your new GRUNDIG Multi-Cyclonic Vacuum Cleaner VCC 6270 C. See the figure on page 3. Please read the following user notes carefully to ensure you can enjoy your quality GRUNDIG product for many years to come.
OPERATION________________________________ Notes ■ Check the appliance for damage caused by delivery/transportation and for lacking parts. Caution ■ Keep the package material out of the reach of children. 2 Insert the wide end of the telescopic tube to the other end of the flexible hose Q . O Attaching/Detaching the dust container 1 Pull the power plug H out.
OPERATION_ _______________________________ 6 Switch on the appliance by pressing the On/Off button F . Note ■ You may use suction control to adjust the suction power during operation. The more you open the control, the more the suction power shall be decreased. Notes ■ You can directly attach the required accessory to the handle P firstly by removing the telescopic tube O . ■ Accessories can also be attached to the end of the telescopic extension tube to reach further points.
INFORMATION_______________________________ Cleaning and maintenance ■ ■ ■ Before cleaning, unplug the appliance from mains and let the vacuum cleaner to cool down completely. Do not immerse the vacuum cleaner in water or in any other liquid. Ensure that no liquid gets inside the appliance during cleaning. Components may be cleaned as follows: Cleaning cyclone assembly and dust container 1 Empty the dust container with dirt.
INFORMATION_ ____________________________ ■ Foam filter T , motor protection filter U and HEPA outlet filter W should be cleaned regularly. You can wash the filters with liquid soap and then use them when they are dried. Filters should be cleaned after every two operations; otherwise, the suction power may be decreased and it may cause a foul smell.
INFORMATION_ ____________________________ Appliance surface care Clean the appliance with a damp cloth. Then, wait until it is dried. Caution ■ Never use petrol, thinner and harsh or abrasive cleaning agents to clean the appliance. ■ Store the vacuum cleaner out of the reach of children. ■ Troubleshooting Disconnect your appliance from mains supply and wait until it completely cools down before applying any resolution described in the troubleshooting section.
INFORMATION_ ____________________________ 3 Wash the filters, especially the HEPA filter by removing the fine dust carefully, if required. Let the filters dry completely before replacing them. Environmental note 4 Wait for about 40 minutes to allow cooling of the motor and deactivation of the safety mechanism. Therefore, do not dispose of the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment.
Grundig Intermedia GmbH Beuthener Strasse 41 D–90471 Nürnberg www.grundig.
