CYLINDER VACUUM CLEANER BODYGUARD VCC 9450 A EN
________________________________________________________ A B C D E F H G O M Q P K J I N L H R 3
________________________________________________________ ENGLISH 4 05 - 13
SAFETY Please read this instruction manual thoroughly prior to using this appliance! Follow all safety instructions in order to avoid damages due to improper use! Keep the instruction manual for future reference. Should this appliance be given to a third party, then this instruction manual must also be handed over. ▪ The appliance is designed for domestic use only. Improper use will void the warranty.
SAFETY ▪ Change the dust bag, if the indicator switches to red. ▪ Only use original GRUNDIG accessories or Swirl® dust bags for replacement. ▪ Always pull out the power cord before cleaning or carrying out any maintenance on the appliance. ▪ Whenever possible, insert the power cord plug directly into the socket. Avoid using extension cables or multipoint connectors. ▪ Pull out the power plug after use. Do not disconnect the plug by pulling on the cable.
AT A GLANCE Dear Customer, Controls Congratulations on the purchase of your new vacuum cleaner VCC 9450 A. Read the following user notes carefully to ensure full enjoyment of your quality GRUNDIG product for many years to come.
OPERATION________________________________________ Inserting/removing the hose 1 Push the hose nozzle D in the arrow direction into to the hose inlet P . 3 Push the height setting switch J in the arrow direction and pull from its end in order to adjust the length of the telescopic tube K . Inserting/removing floor brush ■ The fasteners on the hose nozzle click into position. D should the multi- Press the release button to insert or remove the telescopic tube K to and from the multifloor brush I .
OPERATION________________________________________ Installing the batteries Operation 1 Press the button located beneath the handle. 1 Pull the plug behind the appliance and plug it in the socket. 2 Press the ON/OFF button the appliance. Q to start or stop Adjusting the suction power You can adjust the suction power from “+/-” button on the handle F and can turn it on/off from “ ” button. On / Off Increase 2 Remove the battery lid.
OPERATION________________________________________ Accessories There is an accessory holder G on the telescopic tube. You can place 2 of the accessories provided with the appliance on it. 77 In case you do not want to use it, you may remove the accessory holder G from the telescopic tube K by unscrewing it with a screwdriver. Turning off the vacuum cleaner and parking 1 Turn off the device by pressing the ON/OFF button Q and plug it out.
INFORMATION_ ___________________________________ Before cleaning your appliance, turn off and unplug. Caution 77Never use gasoline, solvent, corrosives, metal objects or hard brushes for cleaning your appliance. Replacing the dust bag Caution 77The holder of the dust bag must be pushed down into the bag holder so that the cover of the vacuum cleaner can be closed. Do not force the upper lid C to close it; otherwise, the plastic components may get damaged. 77 Do not wash a dust bag.
INFORMATION_ ___________________________________ Motor protection filter HEPA filter 1 Press the lid button at the front side to open the upper lid C . 1 Press the rear lid button to open and remove the HEPA filter. 2 Push the filter cover latches towards the arrow direction shown to open up the filter lid. 2 Shake off and rinse it with water. 3 Leave the HEPA filter for drying after rinsing. Storage Store the appliance carefully when you do no want to use it for a long time.
INFORMATION_ ___________________________________ Environmental information This product has been made from high-quality materials and parts, which are suitable for recycling and can be reused. Therefore, at the end of its life, the product must not be disposed of in the normal domestic waste, but must be taken to a collection point for recycling electrical and electronic appliances. This is indicated by the following symbol on the product, in the instructions for use or on the packaging.
Grundig Intermedia GmbH Beuthener Strasse 41 D–90471 Nürnberg www.grundig.
