PORTABLE MEDIA PLAYER VP 6200/30GB ENGLISH
About the Portable Multimedia Player 1. VP 6200/30GB is a portable multimedia player with the features to record, play and store varieties of animation/audio/image files. 2. VP 6200/30GB is provided with the encoding function in order to store and play signals directly received from external audio devices such as voice recorder and CD player and video devices such as TV through the LINE IN port in digital data format. 3. 4. VP 6200/30GB has a built-in camera to take images and animations.
SAFETY CONCERNS For product safety and correct operation, the following information must be given to the operator/user and shall be read before the installation and operation. Conventions WARNING Provides instructions that the reader should follow in order to avoid personal injury or fatality. CAUTION Provides instructions that you should follow in order to avoid a service failure or damage to your PMP. NOTE Indicates additional information as a reference.
Caution CAUTION Precautions associated with power Do not touch the adaptor with wet hands. Use only the specified adaptor. - This might be a reason of electric shock. - Using a different type of adaptor may damage the product. Make sure to insert the adaptor into electrical receptacles with ground ports. Make sure to insert the plug tightly. - This might be a reason of electric shock. 4 - This might be a reason of fire.
Precautions when using the product Do not listen to the music for a long time with a large volume. Do not exert impact on LCD panel and camera lens. - This might damage your hearing ability. - This might be a reason of product trouble. Do not use the head set/ear phone while driving or walking. In case the product is smoking or deformed by heat, stop using the product and contact the Call Center. - This might be a reason of an accident.
Precautions associated with the product Do not leave the product under too hot (over 35°C) or too cold (below -5°C) environment. - This might be a reason of product trouble. Do not leave the product under direct sunlight or in a closed car. - This might be a reason of product trouble. 6 Do not leave the product in a dusty place, bathroom and wet place. - This might be a reason of product trouble. Do not place the product near cash cards, prepaid cards, etc.
Other precautions Clean the product with soft and dry cloth and do not use benzene or thinner. Take care not to introduce dirt or fluids into the product and camera lens. - This might be a reason of product trouble. - This might be a reason of product trouble. In such as case, stop using the product and contact the Call Center. Do not repair, disassemble or revise the product at random. Take care not to drop the product. - This might damage the product. - This might be a reason of product trouble.
TABLE OF CONTENTS SAFETY CONCERNS 3 Conventions................................................................................................. 3 Caution....................................................................................................... 4 TABLE OF CONTENTS Introduction 8 12 Features of the product ................................................................................ 12 Package ...............................................................................................
Isolate from PC ........................................................................................... 33 LCD Panel.................................................................................................. 34 Main Menu Screen ........................................................................................... File Search Screen............................................................................................ Video Record/Play Screen .............................................
Audio Functions 73 Play Audio ................................................................................................ 73 Record Audio ............................................................................................. 79 FM Radio Functions 82 Receive FM Radio........................................................................................ 82 Record FM Radio.........................................................................................
Change Background Image 107 How to use LyricsED 108 Upgrading Firmware 112 Troubleshooting 113 Specifications 116 Environmental note ...................................................................................
Introduction Features of the product Playing MP3 and WMA music files The product can play high quality digital music files (MP3, WMA). AVI (XviD, DivX(3.x, 4.x, 5.x), ASF (Recorded File from VP 6200), Video File It can play various types of high quality animation files. Digital camera function It is equipped with a digital camera of 1.3 Million pixels in order to take images or animations. Receiving and recording FM You can receive FM radio broadcasting and record it in MP3 file.
Recording voices in high quality MP3 format The product is provided with MIC to store and play voice signals in high quality MP3 file. Recording/storing external video or audio input signals in ASF/MP3 files It stores images of video/audio/TV converted into ASF files or audio signals of CDP/MP3P converted into MP3 files. Editing lyrics (supports lyrics editing program) You can display lyrics of audio files on the LCD panel through the words editing program. Providing 3.5” TFT LCD The product provides 3.
Utilizing as an external storage device You can use the product as an external storage device by connecting the player with PC through USB cable. Fixed bit rate You can conveniently do voice recording or line in recording depending on circumstances (Fixed Bit Rate: 128kbps, Sample Rate: 44.1 KHz). Equipped with lithium polymer battery for charging You can conveniently charge the battery with the wall outlet power without purchasing a battery additionally.
Package VP 6200/30GB USB Cable Y Cable Software Installation CD Stereo Earphone Power Adaptor Cradle User Guide AV Cable Format conversion CD Hand Strap Carrying Case 15
Mechanical Features HOLD Switch Reset Button Hand Strap Hole REC Button Microphone Camera Earphone Port Jog Button Built-in speaker On/Off Button Menu Button Repeat Button OSD Button ESC Button LINE IN Port LINE OUT Port Power LED Charge LED LCD Screen 16 Built-in speaker USB Port Power Adaptor Port
Battery Charging You can charge the battery by connecting the power adaptor to the cradle and placing the body on the cradle or by directly connecting the power adaptor to the adaptor port. The LED color indicates the charged amount during charging. (Red-Orange-Green) The battery will be full chaged from entirely discharged stage roughly 5 hours later.
Connection Stereo Earphone Connection Audio Connection Connect the stereo earphone to the earphone port. Connect the Line In port of the body with the external audio device. TV Connection for Playing Connect the Line Out port of the body with the TV input port using the AV cable TV Connection for Recording Connect the Line In port of the body with the TV output port using the AV cable. 18 PC Connection Connect the USB port of the body with that of PC using the USB cable.
Listening in External Audio devices Select [AUDIO PLAY] after connect the player with external audio device by using Y Cable and AV Cable.
Line In (Recording from External Device) Select [AUDIO PLAY] after connect the player with external audio device by using Y Cable and AV Cable. It should be set as ‘Line’ for ‘Audio Input’ in ‘Audio Recording Setting’ (Refer to the Page 72~80). Y Cable Audio (L) AV Cable Audio (L) Audio (R) Audio (R) Video Please connect the Y cable to AV cable properly. If one of Y cable is connected with AV cable for Video, the sound will be heard from only one side.
Watching TV Connect Player to TV by connecting AV cable AV Cable Video Audio (L) Audio (R) - If you want to connect TV to the player and display output of the player on the TV screen, please set ‘Screen Output Mode’ to ‘TV’ from the ‘SYSTEM SET’ menu on the main menu screen. In that case, the LCD panel vibrates, ensuring good quality of the TV screen (This phonomenon is not a product trouble).
TV Recording Connect the player to TV by using AV cable, and select [VIDEO RECORD] or [IMAGE RECORD]. It should be set as ‘Line’ for ‘VIDEO INPUT’ of [VIDEO RECORD] or [IMAGE RECORD] (Refer to page 56~60). AV Cable Video Audio (L) Audio (R) The color of Input/Output cable and AV cable are subject to different from manufacturer. In that case, try to connect the video cable alternately uitil find the video signal, and connect Audio cable.
USB Driver Installation (In case of Windows98) You need not install the USB driver under other operating systems, but should install it only if the PC OS in use is Windows 98/SE. Automatic Installation 1. Insert the software install CD provided with the product into the CD-ROM drive of PC. 2. Select ‘USB Device Driver’ on the software install screen.
3. The following message appears when ‘USB Device Driver’ is selected. Click the [OK] button. 4. Click the [Yes] button and reboot the PC.
Manual Installation of Windows 98 driver 1. Turn on the player power and connect the VP 6200/30 GB player with PC using the USB cable. 2. The following is displayed if you choose [Control Panel] → [System] on the Windows background window and select the [Device Manager] tab. Click [Refresh] button.
3. Device driver search appears. Click [Next>] button. 4. Select ‘Display a list of all the drivers in a specific location, so you can select the driver you want.’ and click [Next>] button.
5. Select ‘Hard disk controllers’ and click [Next>] button. 6. Click [Have Disk...] button.
7. Insert the provided CD into the CD-ROM drive. Select ‘Win98’ folder and click [OK] button.
8. Click [Next>] button. 9. When completion screen of USB driver installation is shown, click [Finish] button.
Confirmation of USB driver Installation 1. The following is displayed if you choose [Control Panel] [System] on the Windows background window and select the [Device Manager] tab. 2. If you select ‘disk drive’, installed USB driver is displayed. If USB driver is not reconized with the above method, uninstall the USB driver you installed, and install USB driver again.
Connecting To a Computer Recommended PC Specifications Part 1. Specifications CPU Pentium MMX or above OS Windows 98SE/ME/2000/XP/Mac/Linux Hard Disk 50 Mbyte or more hard disk storage available Other CD-ROM drive, USB port The Windows Explorer recognizes the body connected to the PC as a ‘PMP’. There are five folders of ‘Music’, ‘Movie’, ‘Image’, ‘Data’ and ‘System’.
- The player would not work normally if you delete the default folders created under the ‘PMP’. Therefore, do not delete these folders. - Please do not format ‘HDD’ if possible, but if you have to format please do ‘FAT32’ format. - The maximum Sub-Folder is up to 16 steps. - ‘MUSIC’, ‘MOVIE’, ‘IMAGE’, ‘DATA’ can save sub-folder up to 400 folders and 4000 files per each folder. 2. Select a file to store in the body from the PC and drag or copy it in the corresponding folder of the ‘PMP’.
Isolate from PC 1. Select the portable hardware icon from the task bar on the Windows background screen and click on the right-hand mouse button to choose the ‘Safe hardware isolation’. 2. Select a hardware device to isolate from the PC and click the [Stop] button. 3. Click the [OK] button to identify the device to stop. 4. Check the ‘Safe Hardware Isolation’ indication on the task bar and click the [Close] button to finish. Abnormal isolation of the USB cable from the body might damage the product.
LCD Panel Main Menu Screen Lock (HOLD) Power Adaptor Connection HDD Run Status Battery Charge Current Time Menu Icon Press the [OSD] button shortly in the main menu screen, skin color will be changed.
Icon Menu Function AUDIO PLAY Play audio (music file). VIDEO PLAY Play video (animation). VIDEO RECORD Record the moving picture signal input from the camera or an external device. IMAGE RECORD Record the image signal input from the camera or an external device. IMAGE PLAY Play images (photo files). SYSTEM SET Set user environment for the player. TIME SET Set a time. FM RADIO Listen to the FM radio or records FM radio signals.
File Search Screen If you select [VIDEO PLAY], [AUDIO PLAY], [IMAGE PLAY] or [TEXT VIEW] menus, the screen which allows you to select files to play or to search files to delete for each menu appears. Play File List of files in the selected folder Folder list File size Push the jog button in ∧ or ∨ direction to move to the folder in which the file to be played is included. Press the jog button to play the file in the selected folder.
Video Record/Play Screen Video Record Screen Choose the [VIDEO RECORD] menu on the main menu screen. The image screen input from the camera or external device is displayed on the LCD panel.
Video Play Screen Choose the [VIDEO PLAY] menu on the main menu screen.
Image Record/Play Screen Image Record Screen Choose the [IMAGE RECORD] menu on the main menu screen. The screen input from the camera or external device is displayed on the LCD panel.
Image Play Screen Choose the [IMAGE PLAY] menu on the main menu screen.
Audio Record/Play Screen Audio Record Screen Choose the [AUDIO RECORD] menu on the main menu screen.
Audio Play Screen Choose the [AUDIO PLAY] menu on the main menu screen.
FM Radio Receive/Record Screen Choose the [FM RADIO] menu on the main menu screen.
Text View/Play Screen Choose the [TEXT VIEW] menu on the main menu screen.
Power On/Off Power On Push the [ON/OFF] button in the arrow direction for about 1~2 sec. Power is on with the specified screen displayed on the LCD panel and the main menu screen appears. At this time, the menu selection bar is located on the menu last executed For menu non-operation mode such as play, record and record (Ex: main menu setting, file searching, waiting status and others), when no button operation is taken for about 5 minutes, power automatically goes off to minimize power consumption.
LCD Panel On/Off If you need not look at the LCD panel in AUDIO Play, FM Radio Receive, TV Output Mode, etc., push the [ON/OFF] button shortly in the arrow direction to make the LCD panel go off. Shortly push the button again to turn on the LCD panel. This function is useful for reducing power consumption.
Menu Selection Selecting menu operation mode Press the jog button in ◀◀ or ▶▶ direction to move to a menu you want. Press the jog button to select a desired operation mode. Press the [MENU] button shortly on the operation screen to return to the main menu screen.
Menu Selection If you press the [MENU] button long on each operation screen, the screen which allows you to set operation mode appears. Press the [MENU] button shortly on the menu setting screen to return to the operation screen.
ESC Button Functions If you push the jog button in ◀◀ or ▶▶ direction to move to a wanted menu and press the jog button, wanted play mode is selected. Press the [ESC] button shortly on the file searching screen or play/record screen, you can return to the main menu screen.
Video Functions Play Video 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [VIDEO PLAY] menu and press the jog button. 2. When the video file search screen is displayed, push the jog button in ∧ or ∨ direction to move to a file that you want to play and press the jog button to play the selected file. You can move between folders or file list of the selected folder by pushing the jog button in ◀◀ or ▶▶ direction.
3. If you press the jog button in ◀◀ or ▶▶ direction during playing, you can move to the previous file/next file. You can move to the previous file by pushing it in ◀◀ direction before 5 sec after starting playing and to the beginning of the file being played by pushing it 5 sec later. 4. You can search the file being played by pushing the jog button long in ◀◀ or ▶▶ direction. 5. You can hide the icons and captions displayed on the screen by pressing the [OSD] button shortly during playing.
6. If you press the [OSD] button long during playing, you can see the file information on the screen and then, press the [OSD] button long again, the file information will be concealed. 7. If you want to display the file searching screen during playing a video file, press the [MENU] button shortly. The video play screen appears when you shortly press the [MENU] button again. The file searching screen is displayed semi-transparently while playing a video file. 8.
9. If you want to exit the video play menu and return to the main menu screen, press the [MENU] button shortly on the video file searching screen after playing is completed. SYNC Mode Setting 1. The icon “A” will be displayed when this file included sub title, and the icon “A” will be disappeared after 10 seconds. When Using The subtitle, the file name of subtitle file should be the same as you wanted animation movie file’s name and in the same folder 2.
3. To setting the displayed sync time, move the jog button to the direction of ◀◀ or ▶▶. It will be moved by 0.5seconds. 4. Press the [REC] button to finish sync mode.
Video Play Setting 1. If you press the [MENU] button long on the file searching screen or during playing a video file, the video play setting screen appears and you can set video play environment. Set transparency of the setting menu screen from ‘Half Tone’ of the ‘General’ item of ‘SYSTEM SET’ menu on the main menu screen. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item. 3.
Class Item General Language Selects a caption language for video play file (English and 34 languages) Resume Sets playing from the point where the file played last stopped (On/Off) Full Screen Sets to the displayed screen in full screen (Off/4:3/16:9) Scope Sets video file play range Mode Description - All: Repeatedly plays all video files in the folders under the ‘Movie’ folder - Dir: Repeatedly plays all video files in the folder which includes the selected video file - 1: Repeatedly plays ju
Record Video 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [VIDEO RECORD] menu and press the jog button. 2. If the image screen input to the camera is displayed on the LCD panel, rotate the camera lens to the object to record to take a comfortable pause. 3. You can change up/down reversal by pressing the jog button. The image on the LCD panel may be seen reversed depending on direction of the lens and objects.
4. You can produce various screen effects by pushing the jog button in ◀◀ or ▶▶ direction. Image effect types: No Effect, Monochrome, Sepia Blue/Red/Green/Magenta, Negative, Solarize1/2 5. Press the [REC] button shortly to start video recording. 6. It can be zoom out or zoom in by moving the Jog button to ∧ or ∨ in QVGA or VGA mode (Zoom function won’t be work in Line In Mode).
7. Press the [REC] button long to finish recording. Press the [REC] button shortly to stop video recording and press it again to resume recording. 8. If you want to exit the video record menu and return to the main menu screen, press the [MENU] button shortly after recording is completed. The recorded file is stored in ‘Record’ folder of ‘Video’ folder. Recorded file format indicates the record time and date. - L041212_162030.ASF: Line input animation record file - C041212_162030.
Video Record Setting 1. If you press the [MENU] button long in record end/wait mode of the video record menu, the video record setting screen appears and you can set video record environment. Set transparency of the setting menu screen from ‘Half Tone’ of the ‘General ‘item of ‘SYSTEM SET’ menu on the main menu screen. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item. 3.
Class General Item Description Video In Selects image input for video recording (Camera/Line) Flickerless Removes up/down flow of flicker/horizontal line noise - Auto: Outdoor or normal setting - 50Hz: Indoor, AC power frequency 50Hz - 60Hz: Indoor, AC power frequency 60Hz Camera Size Selects image quality of camera input (VGA (640×320): 15frame/sec, QVGA (320×240): 30frame/sec) Line-in Size Selects image quality of line input (VGA/QVGA) REC Time(Min) Sets video record time (0~150) A file will b
Image Functions Play Image 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [IMAGE PLAY] menu and press the jog button. 2. When the image file searching screen is displayed, press the jog button in ∧ or ∨ direction to move to a file you want to play and press the jog button to play the selected file. You can move between folders or file list of the selected folder by pushing the jog button in ◀◀ or ▶▶ direction.
3. You can zoom a desired part by pressing the [A-B] button during playing. Whenever you press the [A-B] button, zoom changes in the order of ‘Normal 2x 4x Normal’. You can move the zoom part by pushing the jog button in ∧, ∨, ◀◀, ▶▶ directions. 4. You can move to the previous image/next image by pressing the jog button in ◀◀ or ▶▶ direction. Once the image is enlarged, you cannot move to the previous/next image. If a slide time is set, the next image is automatically played after the specified time.
6. If you press the [OSD] button long during playing, you can see the file information on the screen and then, press the [OSD] button long again, the file information will be concealed. 7. Press the [MENU] button shortly if you want to display the file searching screen while playing an image file. The image play screen is displayed when you shortly press the [MENU] button again. The file searching screen is displayed semi-transparently while playing an image file. 8.
9. If you want to exit the image play menu and return to the main menu screen, press the [MENU] button shortly on the image file searching screen after playing is completed.
Image Play Setting 1. If you press the [MENU] button long on the file search screen or during playing image file, the image play setting screen appears and you can set image play environment. Set transparency of the setting menu screen from ‘Half Tone’ of the ‘General ‘item of ‘SYSTEM SET’ menu on the main menu screen. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item. 3.
Class Item Description General Resume Sets playing from the file played last (On/Off) Mode Scope Sets image file play range - All: Repeatedly plays all image files in the folders under the ‘Image’ folder - Dir: Repeatedly plays all image files in the folder which includes the selected image file - 1: Repeatedly plays just one image file selected Repeat Sets repeated play (On/Off) Shuffle Sets shuffle play (On/Off) Effect Selects play slide effect (Normal/L R/R L/T B/B T/Random) Rotate Sets i
Record Image 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [IMAGE RECORD] menu and press the jog button. 2. If the image screen input to the camera is displayed on the LCD panel, rotate the camera lens to the object to record to take a comfortable pause. 3. You can reverse the screen by pressing the jog button. The image on the LCD panel may be seen reversed depending on direction of the lens and objects.
4. You can produce various screen effects by pushing the jog button in ◀◀ or ▶▶ direction. Recording effect types: No Effect, Monochrome, Sepia Blue/Red/Green/Magenta, Negative, Solarize1/2 5. Press the [REC] button to start image recording. To record image from an external video device, connect the output of the external video device to the LINE IN jack of the player, and select ‘Line’ for image input. If you press the [REC] button, the player starts saving the image from the external video device.
6. You can enlarge or reduce the screen size with the zoom function by pushing the jog button in ∧ or ∨ direction in QVGA mode (Zoom function won’t be work in Line-In Mode). If you select QVGA or VGA mode, the QVGA or VGA mode icon and the zoom -/+ icon are displayed on the image record screen (VGA: Enlarging 2X possible, QVGA: Enlarging 4X Possible). You can change QVGA or VGA mode from the ‘Camera Size’ item on the image record setting menu screen. The zoom function is not available in SXGA mode. 7.
Image Record Setting 1. Press the [MENU] button long from the image record menu. The image record setting screen appears and you can set image record environment. Set transparency of the setting menu screen from ‘Half Tone’ of the ‘General ‘item of ‘SYSTEM SET’ menu on the main menu screen. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item. 3. Press the [MENU] button shortly to exit the image record setting screen.
Class General Item Description Video In Selects record image input (Camera/Line) Flickerless Removes up/down flow of flicker/horizontal line noise - Auto: Outdoor or normal setting - 50Hz: Indoor, AC power frequency 50Hz - 60Hz: Indoor, AC power frequency 60Hz Camera Size Selects camera input image quality - SXGA (1280×1024) - VGA (640×480) - QVGA (320×240) Line-in Size Selects line input image quality - QVGA (320×240) - VGA (640×480) Count When recording image, can takes a many of images by one
Audio Functions Play Audio 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [AUDIO PLAY] menu and press the jog button. 2. When the audio file search screen is displayed, push the jog button in ∧ or ∨ direction to move to a file that you want to play and press the jog button to play the selected file. You can move between folders or file list of the selected folder by pushing the jog button in ◀◀ or ▶▶ direction.
3. Pressing the [OSD] button shortly during playing, you can change the play screen from normal status to ‘Semi-transparent No display (Display just background screen) Normal’. 4. You can change the EQ status by pressing the [OSD] button long during playing. You can change the EQ status to ‘NORMAL/ROCK/JAZZ/CLASSIC/POP/U.BASS/U.EQ’. 5. You can move to the previous song/next song by pushing the jog button in ◀◀ or ▶▶ direction.
6. You can search the file being played by pushing the jog button long in ◀◀ or ▶▶ direction. 7. Press the jog button shortly if you want to stop playing the audio file and press it long to finish playing. The audio file searching screen appears when you finish playing the audio file. 8. If you want to exit the audio play menu, press the [MENU] button shortly on the audio file searching screen after playing is complete.
Audio Play Setting 1. If you press the [MENU] button long on the file searching screen or during playing an audio file, the audio play setting screen appears and you can set audio play environment. Set transparency of the setting menu screen from ‘Half Tone’ of the ‘General ‘item from the ‘SYSTEM SET’ menu on the main menu screen. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item. 3.
Class Item General Language Selects a voice language for audio play file (English and 34 languages) Resume User can play the file which user stopped to see last time (On/Off) Scope Sets audio file play range Mode Description - All: Repeatedly plays all audio files in the folders under the ‘Music’ folder - Dir: Repeatedly plays all audio files in the folder which includes the selected audio file - 1: Repeatedly plays just one audio file selected Repeat Sets repeated play (On/Off) Shuffle Sets s
Class Sound EQ Item EQ Description Sets tone of the audio file output sound being played (Normal/Rock/Jazz/Classic/Pop/U.
Record Audio 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [AUDIO RECORD] menu and press the jog button. 2. Recording starts when you press the [REC] button. Change voice input mode from the ‘Audio Input’ item on the audio record setting menu screen (MIC/Line). To record audio signal from the external audio devices such as CD player, connect the Y cable to the output jack of the external audio device and the AV cable to the LINE IN jack of the player.
4. Press the [REC] button long to finish recording. The recorded file is stored in the ‘Record’ folder of ‘Music’ folder. 5. Press the [MENU] button shortly to exit the audio record menu and return to the main menu screen. Recorded file format indicates the record time and date. - L041212_162030.MP3: Line input audio record file - C041212_162030.
Audio Record Setting 1. If you press the [MENU] button long in record end/wait mode of the audio record menu, the audio record setting screen appears and you can set audio record environment. Set transparency of the setting menu screen from ‘Half Tone’ of the ‘General ‘item of ‘SYSTEM SET’ menu on the main menu screen. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item.
FM Radio Functions Receive FM Radio As the earphone plays the role of an FM radio antenna, make sure to connect the earphone to the earphone port of the body to listen to the FM radio. 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [FM RADIO] menu and press the jog button. 2. Push the jog button in want.
3. You can hide the icons displayed on the screen and the receive screen by pressing the [OSD] button shortly while listening to the radio. Whenever you press the [OSD] button, the status changes in the order of ‘Hide icon/semi-transparent screen Hide receive screen (Display only background screen) Show icon/receive screen (normal status)’. Autoscan Memory Searching Mode If you press the jog button long, audible frequencies are automatically searched and stored.
Autoscan Searching Mode If you press the jog button in ◀◀ or ▶▶ direction long, the frequency automatically increases or decreases to search available frequency channels (Ex: 89.1MHz 91.9MHz). Frequency searching stops when you press the jog button shortly during Autoscan searching. Manual Searching Mode You can directly search audible channels by shortly pressing the jog button in ◀◀ or ▶▶ direction (Ex:91.8MHz 91.9MHz).
Preset Mode 1. Press the [OSD] button long to change to preset mode. The ‘preset’ mode on the screen is selected. 2. Press the jog button in ◀◀ or ▶▶ direction to search preset channels by increasing channel number (93.1MHz 95.9MHz 97.3MHz). Press the [OSD] button long to release the preset mode.
Saving broadcasting channel 1. Press the [A-B] button shortly while listening to the radio. 2. Channel number is displayed on the LCD panel and current frequency being received is stored. Deleting broadcasting channel Press the [A-B] button long while receiving a stored frequency. The channel number displayed on the LCD panel is cleared and the stored frequency being received is deleted.
Record FM Radio 1. Recording starts when pressing the [REC] button while listening to the FM radio. 2. Press the [REC] button shortly to stop recording temporarily and press it again to resume recording. The LCD panel shows the record time during recording. When the record time exceeds the memory capacity, recording automatically stops and only the data recorded by allowed record time is stored. 3. Press the [REC] button long to finish recording. The record file is stored in the format of ‘R041201_161020.
4. Press the [MENU] button shortly to exit the FM Radio menu and return to the main menu screen while listening to the FM radio. FM Radio Setting 1. If you press the [MENU] button long from the FM radio menu, the FM radio setting screen is displayed and you can listen to the FM radio or set recording environment. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item.
3. Class General Item Press the [MENU] button shortly to exit the FM radio setting screen. Description FM Region Selects FM radio receive region (KOR/USA, Europe, JPN) If you change the FM region, you should execute the FM RADIO menu again. Speaker Sets speaker output - On: Concurrent output to the built-in speaker and the earphone - Off: Output to the earphone only REC Time (Min) Sets FM radio recording time (0~90) A file will be recorded up to 1 GB.
Text View Functions Text View 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [TEXT VIEW] menu and press the jog button. 2. When the text file search screen is displayed, push the jog button in ∧ or ∨ direction to move to a file that user want to play and press the jog button to play the selected file. You can move between folders or file list of the selected folder by pushing the jog button in ◀◀ or ▶▶ direction.
3. User can move to the previous page/next page by pushing the jog button in ◀◀ or ▶▶ direction. You can move to the previous song by pushing it in ◀◀ direction before 5 sec after starting playing and to the beginning of the song being played by pushing it 5 sec later. 4. User can search the file quickly by pushing the jog button long in ◀◀ or ▶▶ direction. Time Setting for Automatic Turn the Pages will turn the pages easily.
6. Press the jog button for a while to finish the viewing of present file. Browser of Text file will be displayed after finished to text viewing. 7. Press the [MENU] button to return the main menu at the text file browser after finishing text viewer function. The Maximum capctity of text file is 2MB.
Playing Audio during text view 1. To playing Audio file, press the [OSD] button shortly during seeing the text view. And press the [OSD] button shortly again, Playing Audio file is stopped. Push the jog button or direction to adjust volume during playing. Pressing the [OSD] button during stop status, next music will be playing. 2. To pause during playing, you can press the [A-B] button shortly.
Receive FM Radio during Text view 1. Press the [OSD] button long during text view, you can move FM radio screen, Select you wanted FM Radio channel (Refer to the 81~88). 2. Press the [MENU] button shortly, you can return text view screen. 3. 94 Press the [OSD] button long, you can stop finishing FM radio receive.
Text View Setting 1. Press the [MENU] button for a while at the File Browser, and the text view setting screen is come out as left picture The Transparence of menu screen is controlled at ‘SYSTEM SET’ in Main Menu as below. 2. Select the specification as you want by moving the jog button to ∧ or ∨ direction, and set up with selected specification by using the jog button ◀◀ or ▶▶ direction. 3. Press the [MENU] button shortly to finish text view setting.
Class General 96 Item Description Language Select the language to see the text file (34 Languages) Resume User can see the page which user stopped to read last time (On/Off) Text Half Tone Transparence rate setting (0~3) Auto Page (sec) Set up the speed to turn the pages (0~30 sec)
Special Functions(Common to Video/Audio) Bookmark If you set a certain position in a file being played, the file is played from the specified point or the specified position is searched and played, so that you can promptly search a desired position. Book mark mode on/off Bookmark mode on: If you press the [A-B] button long during playing a file, ‘Bookmark Mode On’ message is displayed to show bookmark mode activated.
Position setting If you press the [OSD] button shortly in bookmark mode, the selected position is marked. Searching during play Push the jog button shortly in ◀◀ or ▶▶ direction to move to the previous/next bookmark position.
Searching in the Search screen Press the jog button in ∧ or ∨ direction in the ‘Bookmark’ folder on the searching screen to move to the bookmarked file. Press the jog button to play from that position. Delete Bookmark (This function is permitted only on the searching screen.) Using the jog button in the ‘Bookmark’ folder on the searching screen, select the ‘Bookmark’ folder or a specific file bookmarked in the ‘Bookmark’ folder and press the [A-B] button long.
Favorite This function is used to select preferred video/audio files and play only the selected files. Add Favorite (This function is permitted only on the searching screen.) Select a specific file on the video/audio file searching screen and press the [A-B] button shortly to add the selected file in the Favorite folder. Delete Favorite (This function is permitted only on the searching screen.
Section Repeat You can set a specific section and play it repeatedly. 1. Press the [A-B] button shortly at the position to start repeated play. The [A→] icon is displayed on the screen. 2. Press the [A-B] button shortly again at the position to finish repeated play. The [A↔B] icon is displayed on the screen and the selected section is played repeatedly.
3. Press the [A-B] button again if you want to clear the section repeat function during repeated play. The [A↔B] icon disappears and repeated play is cleared. In case of video files, the play start position may be a little delayed compared with the specified position from the characteristics of files.
Setting Function System Set 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [SYSTEM SET] menu and press the jog button. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item. Press the [MENU] button shortly to exit the system set screen.
Class General Description Language Sets the language displayed on the screen (English) Scroll Speed Sets character scroll speed (0~2) Half Tone Sets transparency of the set menu screen (0~3) LCD Off (Sec) Sets LCD off time when there is no button operation (0~30) Power Off (Min) Sets automatic power off time (0~150) Display Out Sets display output mode (LCD/TV) LCD Backlight Sets brightness of LCD panel (0~10) TV Standard Sets TV output mode (NTSC: Korea/PAL: Europe) TV X Position Moves T
Time Set 1. Push the jog button in ◀◀ or ▶▶ direction on the main menu screen to move to the [TIMER SET] menu and press the jog button. 2. Push the jog button in ∧ or ∨ direction to select an item to set and push it in ◀◀ or ▶▶ direction to set the selected item. 3. Press the [MENU] button shortly to exit the timer setting screen.
Class Time Item Hour/Minute Description Sets the current time (24 hour scheme) - Hour (0~23) - Minute (0~59) Day/Month/Year Sets the current date.
Change Background Image You can change the background screen of the body using a desired image (picture) file. 1. Connect the USB port of the body with that of PC using the USB cable. 2. Copy an image file in the ‘System’ folder of ‘PMP’ from Windows Explorer. 3. Rename the copied file as ‘Background.jpg’. 4. When the USB cable is disconnected, the image file copied in the ‘System’ folder automatically appears on background screen.
How to use LyricsED 1. Clicking the Lyrics icon will show this screen below (as illustrated).
2. Click the [Open MP3] button to select an MP3 file and press the [Open] button. 3. Click the [Open TEXT] button to select a lyrics text file and press the [Open] button.
4. Press the [Stop] button if you want to stop, and press the [Play] button if you want to play again. 5. Press the [Marking] button and drag to select the lyrics in the Lyrics Edit Window to mark the time at the beginning of the sentence. 6. Press the [Save TEXT] button, and then it will be saved.
7. Press the [Play] button to play the music and the lyrics will be displayed in the Lyrics window. Music and Lyrics files should be saved as the same file name in the same folder, otherwise it can not be displayed.
Upgrading Firmware You can download a new version of firmware and upgrade your system in the following procedure. 1. Visit the product homepage (www.grundig.com), and download the new version of firmware to PC. 2. Connect the player and PC with the USB cable. 3. Save the downloaded firmware file in the folder ‘System’ Folder of ‘PMP’. 4. If you disconnect the USB cable from the player, the firmware is automatically upgraded. 5. To upgrade a up to dated firmware ver.
Troubleshooting This section provides the problems and solutions in using VP 6200/30GB. Check the following before contacting the customer center. 1. The product is remained off and no information is displayed on the LCD. Recharge the battery. 2. As the power is on, the message ‘Hold Status, Power Off’ is displayed, and then, the power gets off. Release the HOLD switch, and switch on power again. 3. The buttons do not work. 1) Check if the lock icon is displayed on the LCD.
4. The LCD screen flickers up/down. If ‘TV’ is selected as the screen output, the LCD screen flickers. It is the process to adjust the TV screen, and not a defect. 5. The TV screen flickers or displays image abnormally if ‘TV’ is selected as the screen output. 1) To watch the TV, you should set the player to the TV broadcasting system.(e.g. PAL for European countries) 2) Check if the TV broadcasting system is ‘NTSC’ or ‘PAL’, and set up the player properly. 6.
8. The movie/audio/image file is not played. 1) The file format must be supported by the player. 2) Check if the file to play is supported by the player, and select the supported file format. 3) If the file format is not supported by the player, convert the file format with the supplied file format conversion software program. 9. No picture or sound of video 1) Check the video file in the ‘Movie’ folder. 2) Check if the ‘Power LED’ is blue, and move the [ON/OFF] button slightly following the arrow. 10.
Specifications Part Audio FM radio File Item Specifications No of channels Stereo (Left/Right) Frequency range 20 Hz ~ 20 kHz Headphone output Left 6 mW + Right 6 mW (Max. volume, 16Ω ) Speaker output Left 250 mW + Right 250 mW (Max volume, 8Ω) Signal to noise ratio 90 dB or higher (with A filter) Frequency range 87,5 MHz ~ 108.0 MHz (worldwide) Signal to noise ratio 50 dB or higher (with A filter) Decoding file Video: AVI (XviD), DivX (3.x, 4.x, 5.
Part File General Item Specifications Bit Rate MP3: 16 kbps ~ 320 kbps, VBR (Variable Bit Rate) WMA: 32 kbps ~ 320 kbps Tag ID3 V1 Tag, ID3 V2 Tag Caption Video subtitle file (smi), Audio subtitle file (Irc) Text File TXT Support Dimension(W×H×D) About 116×78×23 mm Weight About 220 g Play time Video: about 7 hrs (QVGA), 5 hrs (VGA) (LCD light 5, Vol. 20, Using Earphone) Audio: about 13 hrs (LCD Off, 128Kbps, Vol.20, Using Earphone) Radio: about 21 hrs (LCD Off, Vol.
Part General Item Specifications Recharging Fully charged with the adapter (5 hrs) Battery Li-polymer battery LCD 3.5 inch TFT LCD Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices.