W K C 35 72 0 51 RRDDSS SECURITY CODE
Contents Please note Operating Instructions WKC 5201 RDS 3 Identity Card .................................... 3 Theft protection................................. 3 Attention with automatic aerials ............. 3 Installing the car radio ........................ 4 Removing the control panel .................. 4 Refitting the control panel .................... 4 Traffic safety .................................... 4 GRUNDIG environment initiative ............ 4 Switching on and off .........................
Contents Compact Disc (CD) 17 Selecting the CD programme source ...... 17 Switching the display ........................ 17 Selecting a CD................................. 17 CD pause ....................................... 17 Selecting or repeating a track .............. 17 Fast forward and reverse .................... 17 Playing the 1st track on every CD for approx. 10 secs. (CD SCAN) ................ 17 Playing the tracks on a CD in random order (TRACK RANDOM) ............................
Please note Identity Card The identity card for your car radio contains the type, the serial number and the code number for coding. ǵ Removing the control panel In addition to activating coding, you can remove the control panel of the car radio and take it with you. This renders the car radio worthless to thieves. Theft protection Code label DOUBLE SECURITY SYSTEM Model Type CODE Serial No. í Code No.
Please note Installing the car radio Refitting the control panel These operating instructions assume that the car radio has correctly been installed and connected by a specialised dealer. í Before making a drive please familiarise yourself with the various functions of your car radio. í Volume Information about installing the car radio are to be found at the end of this booklet. Removing the control panel Traffic safety Operating your radio at high volume while driving can endanger you and others.
Please note Switching on and off Phone mode with a car telephone – on the car radio IO Press the POWER button. Your car radio is provided with a connector for a car telephone or CB radio. – with the ignition /starter switch of the car, if the car radio was previously switched off using the ignition/starter switch. Mute When operating the car telephone or CB radio, the car radio is muted. The display indicates "MUTE". “ Switching on for 1 hour max. ...
Brief Operating Instructions Progamme sources Amplifier Using the ¢ rotary knob, you can switch the car radio on and off, alter the volume, and carry out fader, balance, bass, treble, and EXPERT settings. The currently selected function is indicated in the display. The median setting is achieved by pressing the button for a longer period (confirmation message by sound signal).
Display Radio mode U III TP AF LOUD MONO ɳ DX U III DX 8 MW LW LRN U range (VHF). Only stations/RDS programmes with "traffic announcements" are tuned to. RDS programmes with alternative frequencies and AF change are enabled. Improved sound quality at low volume level (LOUD). The radio has manually been switched to mono. Stereo reception Max. search sensitivity.
Amplifier Switching on and off on the car radio Press the “ IO POWER button. Volume Turn the ¢ rotary knob. The display indicates: "VOL 00" … "VOL 50" LOUD (loudness) This function improves the sound quality at low volume levels. Loudness on/off LOUD Briefly press the EXPERT button. With "Loudness" on, the display indicates "LOUD" TRE (Treble) BAL (Balance) ¡ Briefly press the TRE/BAL button. The display indicates: "TREB - 8"…"TREB 00"…"TREB + 8" Use the ¢ rotary knob to change the setting.
Amplifier Terminate the setting: BASS ¡ ¡ Briefly press the BA/FAD button. The display indicates: "BASS - 8"…"BASS 00"…"BASS + 8" Use the ¢ rotary knob to change the setting. Terminate the setting: ¡ Briefly press the BA/FAD button two times, or automatically after approx. 6 seconds. Immediate median position: Press the sounds. ¡ button until the signal BA/FAD FAD (Fader) Front ɫ rear loudspeaker ¡ Briefly press the BA/FAD button two times.
Radio Selecting the RADIO programme source In cassette or CD mode: SO URCE/ Repeatedly press the APF button until the display indicates "RADIO". After selecting the desired range, you will hear the station last tuned to in this range (Last-station-memory). “ You are receiving a stereo broadcast if the display indicates " ɳ ". Range selection VHF range Briefly press the U I, U II or U III.
Radio Calling up the LEARN memory Briefly press the < or > button: "RDS SCAN" appears in the display. After that you will hear the next RDS programme stored in the LEARN memory. Automatic station store Autostore Autostore in the RDS range Select the desired range: U I, U II or U III Press the sounds. “ U III LEARN button until the 2nd signal The display indicates "AS" and the frequency scrolls. After that you hear the programme having the best reception quality.
Radio Memory position buttons 1 – “ 6 “ Select range: U I, U II or U III, MW or LW. Setting the station/RDS programme: If the station/RDS programme tuned to is already stored in the selected range on a programme position button, for example, "U I", the corresponding number is indicated on the display. The display indicates "AF" You are receiving an RDS programme that is being broadcast by several stations with different frequencies.
Radio Traffic announcement standby (TP) To abort a traffic announcement briefly press the TP (TRAFFIC PROGRAM) = Station broadcasting traffic announcements. The radio is in traffic announcement standby if the display indicates "TP". Switching TP on/off: Briefly press the TP/AF button. ¡ TP/AF button. If the TP station tuned to can no longer be received, the radio will automatically tune to a receivable TP station. "LRN ..." appears in the display.
Radio PTY programme buttons The memory position buttons are assigned to the following programme types: 1 NEWS, 2 SPORT, 3 POP (with M.O.R.M) 4 ROCK and 5 CLASSICS (with LIGHT M). “ “ “ “ “ The memory position button 6 PERS (personal) can be assigned to a “ programme type of your choice. 1. Switch on the PTY function: button. Briefly press the PTY DX “ 2. Repeatedly press the < or > button until the desired programme type is shown in the display. 3. Press the sounds.
Cassette Selecting the TAPE programme source Insert a cassette into the cassette compartment. The display indicates "TAPE 1" – or – if a cassette is already loaded: “ Deactivating Cr Press the MONO/ ij button until the signal sounds. ¡ Cassette play with and without Dolby B NR SO URCE/ Repeatedly press the APF button until "TAPE" appears in the display. í Attention with automatic aerials! Your radio switches on automatically when loading a cassette.
Cassette Skipping the selection you are hearing Lock in the s button. The display indicates "APF 1". Skipping or repeating tracks APF = Automatic Program Finder Prerequisite are pauses of at least 3 seconds between music selections (without announcer text or the like). Not suited are music selections with very quiet passages (e.g., classical music) because such passages are treated as pauses. APF on/off SO URCE/ Press the APF button until the signal sounds.
Compact Disc (CD) with "GRUNDIG CD Changer"* Selecting the CD programme source “ SO URCE/ Repeatedly press the APF display indicates "MC01". button until the Switching the display Briefly press the "CD 1 TO1": "TO1 O1: 15": Selecting or repeating a track Briefly (repeatedly) press the button until the number of the desired track is shown in the display. 1 (TRACK +) button: go to next track. 4 (TRACK –) button: go to previous track or repeat current track. “ “ 2 (DISPLAY)button.
CD or DAT Mode Compact Disc (CD) Playing CD's in random order (CD RANDOM) Press the 6 (DISC –) button until the signal sounds: "CD RND" appears briefly in the display. “ Ending CD mode Connecting a CD or DAT player “ SO URCE/ Briefly press the APF button to select another programme source.
EXPERT Settings EXPERT control level A great number of possible settings To make car radio operation as easy as possible, numerous settings that you need only once or occasionally are located in an additional control level (EXPERT). 3. Activating the setting LOUD Briefly press the EXPERT button: "E" appears in the display ("E" = entry). – RDS – – TP AF LOUD MONO 1. Activating the EXPERT function LOUD Press the EXPERT button until the signal sounds. “ 2.
EXPERT 4 Autom. LEARN (radio mode) "IGN OFF" Switching on and off is only possiIO ble with the POWER button. ßI Speed-controlled volume If you are in a reception area in which reception of RDS programmes with traffic announcements is poor, you can disable the "Autom. LEARN (LRN) in radio mode" function. "LRN ON": autom. LEARN "LRN OFF": no autom. LEARN for volume settings greater than "VOL 4".
EXPERT ß? Activating the coding (for detailed infor- mation see the chapter "Coding"). If "CODE" appears in the diplay, coding is not activated. If "SAFE" appears in the display, coding is activated. Maintenance and Care Your car radio has been designed throughout to ensure maintenance-free operation over an extended period of time. If a malfunction should occur, please consult your dealer.
Coding Information about coding Your personal code number is on the identity card of your car radio. Coding is not activated when the radio leaves the factory. If you have “activated” your car radio's coding: As soon as you disconnect the car radio from the car battery (or permanent plus terminal 30), it is electronically blocked. Only you are able to put it back into operation by entering your personal Code Number.
Coding Return to operation The car radio is electronically disabled after it has been disconnected from the car battery (or permanent plus, terminal 30), e.g. after the radio has been removed during servicing. 1. Switch the car radio on: The display indicates "SAFE". After approx. seconds, it will indicate "I - - - -". 2. Enter the code number (on Identity Card), as described in the chapter "Activating coding". 3. Confirm the code number: LOUD Briefly press the EXPERT button.
Installation and Removal Supply voltages Blade contacts A: Figure + A8 – operating voltage (earth) Connect to terminal 31 (earth) of the vehicle. A7 +12 V operating voltage Connect to terminal 30 (permanent plus) of the vehicle. A6 Instrument illumination Connect the blade contact A6 to terminal 58 of the vehicle: When the vehicle's headlights are switched on and the car radio is switched off, the illumination of of the car radio controls can be set with the instrument illumination control.
Installation and Removal Aerial The car radio is designed for aerials with an impedance of 75Ω to 150Ω. Extended aerial cables, e.g. for aerials at the rear of the car, may impair reception. Figures p and ü – If necessary, use the aerial adapter (fig. p). – Fix the aerial adapter (fig. p) or aerial cable (fig. ü) in the plastic holder. Line output Connection for booster or active speaker.
Important Information Speed controlled volume Audio cassettes Enhanced Other Network (EON) SCV = Speed Controlled Volume The car radio is well-suited to most types of signal generators. Your vehicle dealer can inform you whether your vehicle is suitable for “speed-controlled volume regulation”. Cassettes are subjected to high temperatures during car radio operation. Therefore use only high-quality heat-resistant C60 and C90 cassettes from name-brand manufacturers.
WKC 5201 RDS CHANGER CONTROL
WKC 5201 RDS 1 a b 2 3 5 c 4 1 4 C 7 15 18 2 5 B 8 17 20 1 3 5 7 2 4 6 8 5 7 6 8 1 A 13 16 19 3 6 2 4 T 5A d
Ķ Im Falle eines Defektes ǵ Model Type Serial No. Code No. Die Identity Card dient als Eigentumsnachweis mit individuellem Sicherheitscode und erleichtert bei Verlust des Gerätes die Schadensabwicklung. Vor fremdem Zugriff schützen. The identity card serves as evidence of ownership with individual security code and facilitates the settlement in the case of theft of the unit. Keep the document safe.
0123456789 GRUNDIG AG . D-90762 Fürth WKC 5201 RDS 18331-941.
