Users Manual

Setting Up the Reader

GRYPHON™ I GBT/GM4200

SETTING UP THE READER

Follow the steps below to connect and get your reader up

and communicating with its host.

1. Configure the Base Station starting on this page.

2. Charge the Batteries (see page 42).

3. Link to the Base Station (see page 13).

4. Select the Interface Type (see page 15).

5. Configure the Reader starting on page 16 (optional,

depends on settings needed)

NOTE: According to recent modification of Regula-

tion for shipping Li-Ion based battery packs, the

products and their spare battery packs parts are

shipped with a very low residual charge (low state

of charge).

Hence the needs:

• that a new product must be fully recharged

before starting to use it.

and

• that battery packs of the stocked products

GBT/GM4200 and spare battery pack parts

must be periodically recharged. For instance,

by using a WLC4190 cradle powered up with a

12V Datalogic AC/DC adapter (cod.8-0935) or

a USB Type-C cable for at least 30 minutes

each 3 months.