Users Manual

Replacing the Battery Pack

QUICK REFERENCE GUIDE

Table 2 - Radio Base LEDs

The capacitive touch button can be used to force device

connection via the Datalogic Aladdin Software tool and for

paging the scanner when it is activated. Refer to the Gry-

phon I GBT/GM4200 Product Reference Guide (PRG) for a

more detailed explanation.

REPLACING THE BATTERY PACK

Use the following procedure to replace the reader’s battery:

1. With a screwdriver, unscrew the battery cover

screw.

LED STATUS

Power ON / Data

Green ON = Base is powered

Green Blinking = Base receives data and

commands from the Host or the Reader.

2Charging

Green ON = the battery is completely charged

Green fading = battery level 51 to 99%

Amber fading = battery level 1 to 50%

Red fading = pre-charge

NOTE: Before proceeding, read “Battery Safety”

on page 43. To ensure maximum performance,

Datalogic recommends the replacement of the

rechargeable battery pack if you note either of the

following conditions:

• battery life drops below approximately 80% of

the original life;

• battery charging time increases significantly.