Users Manual

Charging the Batteries

GRYPHON™ I GBT/GM4200

CHARGING THE BATTERIES

To charge the battery, simply insert the Gryphon into the

base. When the scanner is fully seated in the cradle, it will

sound a “chirp” to indicate that the cradle has detected

the scanner connection.

The LEDs on the base (shown in Table 1) will indicate the

status of the battery.

NOTE: The Gryphon GBT/GM4200 may get warm

during charging: this is normal and does not mean

a malfunction.

NOTE: Before using the battery, read “Battery

Safety” in the following section. Datalogic recom-

mends annual replacement of rechargeable bat-

tery packs to ensure maximum performance.