Mikado Signature Owners manual manual vers. 1.
Table of Contents: Introduction....................... The Gryphon....................... Mikado................................ The Man.............................. Made in Denmark............... Musical Objectives............... The Gryphon Master Tape Collection............................ Design Principles................ Exterior Design................... Manufacture and Assembly. 3 3 4 4 4 5 5 5 7 8 Using Your Gryphon......... AC Voltage.......................... Burn-in and Warm-up..........
and concert hall dimensions are necessary components. Dynamics and an unambiguous sense of instrument location even in the loudest passages are also high priorities. To achieve these objectives, Gryphon products offer exceptional speed and agility along with seamless coherence in the time domain. Introduction Welcome to the global family of proud owners of fine audio components from Gryphon Audio Designs of Denmark.
project was initially strictly a hobby, not an actively pursued commercial venture, demand generated by reviews and wordof-mouth led to the formal establishment of Gryphon Audio Designs as a separate corporate entity. Mikado 1. \Mi*ka"do\, n. [Jap.] The popular designation of the hereditary sovereign of Japan. 2. Opera by Gilbert & Sullivan The Man Gryphon Audio Designs is the brainchild of Flemming E.
unique library of more than 1,000 original master tapes of recordings made during the Golden Age of studio engineering from 1956-1976. Musical Objectives While scientific method and sophisticated technology play an important role in our electronics design work, at Gryphon we never lose sight of the fact that the keen ears of an experienced listener are the most crucial “calibration tools.
stage power supplies that act as effective mains conditioning filters. Displays and control circuits are fed by a separate power supply to isolate any digital noise artifacts and effectively prevent them from contaminating the signal path. routinely occur in live music and is crucial in recreating the natural decay of musical instruments. Wide bandwidth also improves phase characteristics, for more correct soundstaging and imaging.
goes in, an absolute minimum of internal wiring is included. tors in particular, are thus guaranteed a non-resonant environment. By lavishing attention on each aspect of the circuit and fully understanding the purpose and behavior of every single part of the whole, our designers can optimize performance in each section, before moving on to the next step. This ensures simplicity, a short signal path and a unity of purpose with a single, welldefined objective: musical purity.
handcraftsmanship. The peerless finish, build quality, ergonomics and pride of ownership that contribute to the totality of the Gryphon concept can only be fully understood and appreciated up close and in person. outstanding quality of workmanship. In every aspect of every Gryphon product, the same stringent standards of excellence apply.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications.
be connected to any line input on your pre amplifier or integrated amplifier. * B. 1 Pair of balanced outputs to be connected to any line input on your pre amplifier or integrated amplifier. * C. 1 AES/EBU balanced digital output to be connected to an external D/A converter. D.1 S/PDIF 75 Ohm BNC Coax connection * We do not recommend the use of direct connection to power amplifiers via a passive volume control. Repeat b - c to program more tracks.
Small scratches may be removed with fiberglass polish. Fingerprints may be removed with a damp cloth. Do NOT use spirits or paper tissue. Operation: Playing a CD Activate the lift that opens the lid. On the remote control it is the Disc button - on the Mikado front it is a symbol illustrating the lid. Place the CD firmly. Be sure to center the disc and place the CD clamp on top. Activate the lift to close the lid again.
CLASS 1 LASER PRODUCT Label located at backpanel of unit Complies with FDA performance standards for laser products except for diviations pursuant to Laser Notice No.50 dated July 26, 2001 Caution – use of controls or adjustments or performance of procedures other than those Specified herein may result in hazardous radiation exposure. Laser radiation is only accessible when lid is open and lidswitch is overridden. Warranty does not cover damage due to misuse, accident or neglect.