User's Guide

STEP 3. Run the Outside Antenna Cable

Note

To Outside Antenna

Cable (100 ft.)

To Lightning Protector

Outside Antenna

to 2 ft. cable

TV cables already being used for other purposes can not be shared with the cell

booster during installation.

When mounting the outside antenna to the outside wall of your building, the easiest way is

to run the cable on the outside of the wall and attach it to the exterior of your oce & building.

Then drill a hole through the wall which will allow the cable to appear on the inside of the

building. To avoid any potential harm or damage, make sure that there are no electrical outlets,

sewer water pipes, or electrical wiring in the wall before drilling.

After drilling the required hole, run the cable through and seal it.

In some instances, it may be possible to run the cable up into the fascia of the attic overhang.

In this circumstance, the cable will be accessible in the attic further routing.

B-50K User Guide