User's Manual

Version 1.0



September 2010

Setup Wizard

• Waiting (Operating) Time:

- Typical: 3mins

- Maximum: 5mins

1. Antenna only (AGS setting) is for Auto Gain Setting to optimize this repeater for  eld conditions

a. Every limit level (AGC, Down/Uplink ALC) is normal (example : Standard output power)

b. Auto Gain Setting will run

2. DAS (ALC downlink Limit 7dBm Setting) option is used for connecting this repeater to DAS equipment (LGC DAS,

Mobile Access DAS etc), and following condition should be controlled.

a. AGC turn Off

b. ALC turn On

c. Gain Balance turn Off

d. ALC downlink limit value set +7dBm

e. ALC uplink limit value set normal output power (example : Standard output power)

f. Shut down turn On

g. HPA turn On, If HPA turn off

h. delay alarm reporting time set 5 min

3. DAS (ALC downlink Limit Maximum Setting) option is used for connecting Passive DAS equipment, and 7dB downlink

limit value is set as normal output power level

(Example: Standard output power)

CAUTION

Please make Path On when you run Setup Wizard if Path Off set