User's Manual
Version 1.0
September 2010
© 2010, GS Teletech, Inc.
50
RavenX Setting
•
RavenX is not supplied with Repeater and can be purchased separately from Kentrox.
•
An antenna or antenna cable should be connected to “Primary Celluar” port in Figure 13.
•
One end of an ethernet cable should be connected to “Ethernet” in Figure 1, the other end should be connected to WAN
port in CoverCell25K/100K700.
•
Power should be connected to “Power” in Figure 1. Power supply is provided with RavenX.
•
RavenX will work with CoverCell25K/100K700 with its default setting.
•
RavenX will work with CoverCell25K/100K700 with its default setting.
<Figure 13> RavenX Setting