User's Guide

If the Signal Booster is not in use for 5 minutes, it will reduce gain until a signal is detected. If a
detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the
Signal Booster will automatically turn the power of on that band. For a detected oscillation the
Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5
minute such automatic restarts, any problematic bands are permanently shut off until the Signal
Booster has been manually restarted by momentarily removing power from the Signal Booster.
Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor. The
detailed information was included in the Operational description.
Clear Call User Guide