User's Manual

Version
1.3
Date
November 18, 2016
Page
28/ 61
Title
USER MANUAL
Prepared by
Reviewed by
Approved by
28
©2016 GS Instech Co., Ltd. All rights reserved.
7. Status/ Control & Alarm Monitoring
7.1. Status Monitoring and Control Parameters
• In case of control parameter, present status but also setting value display on Web-UI.
Parameter
Status
Control
Description
Downlink
RSSI
○
A separate display according to CDMA&LTE
Output
○
A separate display according to CDMA&LTE
System Gain
○
A separate display according to CDMA&LTE
ALC
○
Set the ALC function On/Off
ALC Low Limit
○
Set the ALC Low Limit Value
Path On/Off
○
Decide to cut off CDMA & LTE
Attenuation
○
In order to adjust system gain,
set the attenuation value
Isolation (Unit: dB)
○
Display the isolation value between
Donor antenna and Service antenna
Band Selection
○
Select the band that user want to operate
Final AMP
○
Set the High Power final AMP On/Off
ASD
○
Set the Auto Shutdown function On/Off
Uplink
RSSI
○
A separate display according to CDMA&LTE
Output
○
A separate display according to CDMA&LTE
System Gain
○
A separate display according to CDMA&LTE
ALC
○
Set the ALC function On/Off
ALC Low Limit
○
Set the ALC Low Limit Value
Path On/Off
○
Decide to cut off CDMA&LTE
Attenuation
○
In order to adjust system gain,
set the attenuation value
Uplink
Isolation (Unit: dB)
○
Display the isolation value between
Donor antenna and Service antenna
Gain Balance
○
Select the band that user want to operate
& Set the Offset Value
Final AMP
○
Set the High Power final AMP On/Off