User's Manual

Version
1.3
Date
November 18, 2016
Page
50/ 61
Title
USER MANUAL
Prepared by
Reviewed by
Approved by
50
©2016 GS Instech Co., Ltd. All rights reserved.
9.3. Cabling
The cabling diagram of the GST-IC-ELITE1943 is as follows
From
To
Cable
GST-IC-ELITE1943
MGB
Frame Ground Cable: AWG 6/ 10ft
Circuit Breaker Box
AC Power Cable: AWG 16/ 6ft
RF Antennas
RF Antenna Feeder Cable: 1/2 inch Feeder Line
RET control Cable (option)
No use for the unauthorized device
When installing the system, must check the devices that use is authorized.
This conditions apply antenna, cable and coupling device if necessary.
Circuit Breaker Installation in the Box for Overcurrent Protection
Must install the circuit breaker between the system and main AC source for separating.
Make sure to install the Circuit breaker on the place to operate easily
Circuit Breaker is able to operate up to 20A
Terminal, Conduit and Cable Size
To install the conduit is according to NAE regulation, and Terminal sixe is according to
NEC regulation