User's Manual

Version

1.3

Date

November 18, 2016

Page

51/ 61

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

9.4. Service Man Installation Guide

9.4.1. Pole Mount Installation

The procedure for fixing the pole type system is as follows

1) To mount the system on the pole, first fix the bracket on the wanted position.

Figure 14. The way to fix the bracket on the pole (Normal type)

Protection gloves and goggles

Make sure that worker wears protection gloves and goggles to prevent damages from

debris while drilling holes in a Pole or Wall

Cautions while drilling on the pole

Drilling thru-hole on a center of the pole

Repeater

LAG SCREW 3/8"x3"

Φ10.5mm/Φ21mm PLAIN WASHER

Φ10.2mm/Φ18.4mm SPRING WASHER