User's Manual

Table Of Contents

FCC ID : U88GSTR-TRIT-SPR

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.

SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA

TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr

LED Display

• LED displays power and operation status on front side of repeater system.

• DL input and output signal level is verified by LED bar.

4. SET UP

4.1 System Set up

4.1.1 Constitution (based on 1 SET)

Parameter Item Quantity

Major accessory TRI Case 1 EA

Additional components Main power input Cable

Mountable Bracket

Fixable Screw

1 EA

1 SET

User Manual Manual 1 EA

4.1.2 Notice

1) System Power check: Major electricity is AC120V, therefore please input electricity after power

verification.

<Pic.8> MS 3100 A 10SL-3 (Wall Mount Receptacle) & MS3010 A 10SL-3(Plug)

2) Input condition optimization: DL input condition of iDEN is -43 ~ -18dBm, and -56 ~ -16dBm

for CDMA. User should verify input condition of Donor ANT

3) Isolation check between DONOR/SERVICE ANT: Isolation condition of this equipment is 80dBc (Gain+

15dB) in iDEN, and 95dBc (Gain+15dB) in US PCS. User should check its condition before installation.

4) This equipment is basically wall mountable installation.

Report No. : HCT-R07-020 18/37