User's Manual

FCC ID : U88GSTR-TRIT-SPR
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA
TEL:[phone] FAX:[phone] www.hct.co.kr
4
1. Summary
Tri-band In-building repeater is located in blanket / shadow area of insider of building to
transmit Sprint/Nextel CDMA (PCS), iDEN800MHz, iDEN900MHz BTS signal simultaneously.
Characteristics (CDMA)
CDMA (PCS) Band: 80dB Gain with +24dBm maximum output power
iDEN Band: 65dB Gain with +25dBmmaximum output power.
Bandwidth: Entire 1900MHz CDMA (PCS) frequency A Block to G Block (65MHz). Bandwidth
selection functions per user’s situation.
- 5MHz, 10MHz, 15MHz Block and contiguous 20MHz combination
- Three of non contiguous 5MHz block combination
- 10MHz, 15MHz Block could be divided by 5MHz-Sub block.
- Remote control via Web based user interface
Characteristics (iDEN 800MHz)
Bandwidth
- Downlink 851MHz~869MHz, Uplink 806MHz~824MHz (18MHz Band)
- Downlink 862MHz~869MHz, Uplink 817MHz~824MHz (7MHz Band)
To avoid paging signal interference at 940MHz side, IF Converter shift SAW filter edge by
200KHz, 400KHz. (TX Edge only, not whole bandwidth).
- IDEN800MHz, iDEN900MHz simultaneous service
- Remote selection either 18MHz or 7MHz
- Downlink band-edge adjustable (SAW Filter select)
Report No. : HCT-R07-020 4/37