User's Manual

FCC ID : U88GSTR-TRIT-SPR
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA
TEL:[phone] FAX:[phone] www.hct.co.kr
5
Characteristics (Tri-Band)
Basically system box is two combination types of iDEN and CDMA technologies. Functional
modules are classified as below.
- 6-Plex and Hybrid Multiplex Cavity Filter to combine HyCDMA (PCS), iDEN 800MHz, iDEN
900MHz, Duplex input/output signal.
- LNA(Low Noise Amplifier),
- Gain Block to transmit output signal to PAM (Power Amplifier Module).
- Donor LNA, Server LNA Module, which include Divider / combiner for IF Module interface.
- IF Converter Module (thee in CDMA side, one of each iDEN800MHz, iDEN900MHz side)
- PAM Module to amplify output power linearly in accordance with optimal repeater output
power.
- Power Supply Unit
- Controller to monitor each module in repeater.
All modules in Tri-Band repeater are commonly compatible with CDMA and iDEN standalone
box.
Abbreviation
PAM: POWER AMPLIFIER MODULE
LNA: LOW NOISE AMPLIFIER
AGC: AUTO GAIN CONTROL
ALC: AUTO LIMIT CONTROL
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
Ethernet Instruction “ This equipment is indoor use and all the communication wirings
are limited to inside of the building” or similar texts.
Replaceable batteries instruction
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECTIVE TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Report No. : HCT-R07-020 5/37