User's Manual

FCC ID : U88GSTR1930DT-SPR
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA
TEL:[phone] FAX:[phone] www.hct.co.kr
15
4. SET UP
4.1 System Set up
4.1.1 Constitution (based on 1 SET)
Parameter Item Quantity Remark
Major accessory CDMA 30dBm repeater 1 EA Manufacture company supply
Additional
components
Ethernet Cable (cross)
Power Supply Cable
Fixable Screw x 4 (Size: φ1/2”,
length: 2” )
Ground Cable
CD which contains User Manual
and installation Guide
1 EA
1 EA
1 SET
1 EA
1 EA
Manufacture company supply
User Manual Installation Guide (Book) 1 EA Manufacture company supply
Antenna
Donor ANT
Server ANT
1EA
1EA
Establishment construction company
preparation
RF Cable Antenna connection Cable TBD
Establishment construction company
preparation
Repeater quality
confirmation
equipment
Spectrum Analyzer 1EA
Establishment construction company
preparation
4.1.2 Notice
1) System Power check: Major electricity is AC110V, therefore please input electricity after power
verification.
2) Input condition optimization: DL input condition is -56 ~ -16dBm. User should verify input condition of
Donor ANT.
3) Isolation check between DONOR/SERVICE ANT: Isolation condition of this equipment is 95dBc (Gain+
15dB). User should check its condition before installation.
Report No. : HCT-R07-013 15/33