User's Manual

FCC ID : U88GSTR1930DT-SPR
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA
TEL:[phone] FAX:[phone] www.hct.co.kr
19
b. Signal Generator: 3GHz
c. Spectrum Analyzer: 3GHz
d. Multi Meter
4.2.2 Notice
a. Trouble shooting should be performed with drastic knowledge basis.
b. Unsure parts should not be disassembled.
c. When in trouble shooting, technician should use attenuator to check output side.
4.2.3 Note at set up process / Check point after open for service
Item Check Point Trouble shooting
Note
before
system
operation
* System Input power range
Input Level
D -1own Link 00dBm/Total ~ -20dBm/Total
U -1p Link 00dBm/Total ~ -20dBm/Total
Same as
above
* System Gain
Gain
D 50own Link ~ 90dB
U 50p Link ~ 90dB
Same as
above
* Output power at edge port side
Output power
D 30own Link dBm/Total
U 30p Link dBm/Total
Report No. : HCT-R07-013 19/33