User's Manual
Table Of Contents
- Installation / User Manual
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Maintenance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Safety Characteristics and Certification
- Appendix C EC Declaration of Conformity
- Appendix D Innovation, Science and Economic Development Canada Statement
- Appendix E FCC part 15 statement
- Appendix F FCC RF Exposure
- Appendix G FDA declaration
- Appendix H Reduction of Hazardous Substances
- Appendix I Disposal and Recycling Information
- Appendix J California Proposition 65
- Appendix K Product material composition
- Appendix L Packaging Characteristics
- Appendix M EDGE GSF LFID with Auto Tuning - End-of-Life Disassembly
Chapter 2: Installation
EDGE GSF LFID W/ AUTO TUNING Connections
Connection output (5) is dedicated to the LFID Antenna. Connect the LFID Antenna cable to output (5).
Connecting to Power Source
The EDGE GSF LFID W/ AUTO TUNING power is supplied by the EDGE GSF. When the EDGE GSF is
powered on, the EDGE GSF LFID W/ AUTO TUNING is running.
The EDGE GSF comes with a power cord of 3 meters (9.8 feet). The EDGE GSF voltage is limited by the
power cord provided with the model. Voltage will vary depending on the EDGE GSF model purchased.
NOTE: The working voltage range is between 90 Vac and 264 Vac. The system consumes a power of
65W.
WARNING
Only use LFID Antenna sold by the GSI Group, Inc.
Figure 2-2 EDGE GSF Connection Port Identification
1 — Sprayer 1 connector
2 — Sprayer 2 connector
3 — Sprayer 3 connector
4 — AUX connector
5 — EDGE GSF LFID W/ AUTO TUNING connector
6 — Power cord
890-00682 EDGE GSF LFID W/ AUTO TUNING
15