Phone user manual User Guide 1
Preface Thank you for choosing S400 mobile phone! is an Android intelligent mobile phone, it has the ultra-thin fashion appearance, it supports application software installation and unloading from Android electronic market, WLAN network connection, touch capacitive screen, high-pixels cameras, high-quality audio and ultra HD video, etc. These will lead you into an entirely new and fascinating mobile internet world. This manual systematically introduces many functions of S400mobile phone, tips and notes.
When approaching the places that storing fuel, chemicals or explosives, and etc., please comply with the laws, regulations and the relevant signs. Please place the phone, battery and charger in the place out of children’s reach, for fear that the children use them as tools and cause personal injury. Your phone only can use the batteries, chargers and other accessories specified by the company for fear that the phone is damaged.
Don’t make the phone approach to the magnetic card and other magnetic objects too closely; radiation wave of the phone may clean out the information stored in the floppy disks, stored value cards and credit cards. Please place the drawing pin and other small metal objects in the place that far from the headphone of the phone. The loudhailer is magnetic when it is working and will attract these small metal objects so that may cause personal injury or damage the phone.
Service life of the battery is limited. Service time of the battery is gradually shortened after the frequent charging. If many times of charging is failed, it means that battery life is drained, please replace the new battery of designated type. 3.4 Cautions of Using the Charger Please don’t take down or modify the charger; otherwise it may cause personal injury, electric shock, fire breakout or charger damage. Please use 220V alternating current.
service provider to buy a new card. You can’t change PUK. If you lose the code, please contact with your service provider. 3.5.3 PUK2 When changing the locked PIN2, you need to input PUK2. If you input wrong PUK2 for continuous ten times, you can’t use the functions that need PIN2. Please contact with your service provider to buy new card. You can’t change PUK 2. If you lose the code, please contact with your service provider. 3.
Contents Ⅰ. SAFETY PRECAUTIONS ...................................................................................................................................... 7 Ⅱ. BEFORE USE .......................................................................................................................................................... 8 1. INSTALL AND UNLOAD SIM CARD ........................................................................................................................ 8 2.
Please backup the important information or keep a written record, to prevent its loss. When sending an emergency call, please ensure your mobile phone power on and in a service area, inform your position, without permission, please don't end this call. Ⅱ. Before Use 1. Install and Unload SIM Card 1.1 About SIM Card Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the phone. SIM card provided by network supplier.
manual. If you just insert one SIM card, maybe some options of the menu will not be shown. 2. T-Flash Card Aim at the T card slot and push the T card gently, and the card will be inserted correctly. Prompt: If the memory card is failed, please check whether it is correctly placed and good contact of metal point. 3. Install and Unload Battery Take off the rear cover of the mobile. Make one end of battery with metal surface aim at the battery connector.
Ⅲ. Quick User Guide The phone has not only the basic functions of mobile phone, but also support rich, practical and rapid feature functions, can be briefly introduced as follows: 1. Power On/Off In the power-off mode, long press [Power] key, it will power on; otherwise. In the power-on, long press [Power] key, and choose Power off, it will power off. If you set up SIM lock or phone lock, please input the code according to the requirements.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.