User Manual 2G Feature phone Model: RAYO SOL Contents Overview. …………………………………………………………………………….……2 1. Introduction …………………………….……………………………………………….3 2. Function of main menu……………………………………………..……………………4 3. Maintenance and service………………………………………………….……………...
Overview Please read the following concise rules carefully. Nonobservance to the rules may lead to danger or violence of the laws. The user’s manual gives details about the safety precautions. Emergency call Make sure the equipment is in the covered area of the network service and the calling f unction is activated. As per the specific requirements, press the key of finish to clear the screen and return to the standby state. Input the emergency call number (112)and press the call key.
Introduction Insert the SIM card and the battery Ask your SIM card dealer whether he has provided SIM card service and the method of usage who may be service provider or other dealers , SIM card and its contacts are vulnerable to scratch or bending. Attention shall be attached when use, insert or take out the card. Inserting/taking out T-FLASH CARD Only use approved and compatible T-FLASH card applicable to the mobile phone.
input PIN or UPIN, please input the required password (shown as **** on the screen). Function of main menu Contacts Save the information of contacts , including names and telephone numbers in the contacts. Message Write a message: You can choose to send the complete message from SIM card 1 or SIM card 2, You can choose multiple receivers to send the message to more than 1 person.. Call logs By telephone if you need to check you call logs>click select call logs menu>View: 1.All calls 2.
your phone settings back to factory default state value, the user of the function be used with caution. (Default password: 1234). Display Settings 1.1.Animation effect:Set power on/off animation. 1.2.Wallpaper setting:Set wallpaper. 1.3.Idle display settings:You can choose to display or not display. 1.4.Brightness:The menu is to control of mobile phone screen brightness 1.5.Display backlight :The menu is to control of mobile phone display backlight time. 1.6.
Camera In the options of camera, you may set the photometry mode, flash light , exposure compensation, avoidance of flickering, postponing shooting, white balance, photo quality, photo size, special effect, profile and etc. You may enter the album to check the formats that the cell phone supports. Image viewer Check the pictures in the memorial card in formats supported by the cell phone. Video Recorder phone provides video recording, select video footage that can enter the video recording.
Games This phone provides you some built-in games. You can also adjust the game settings when you enter the game menu. Please refer to help option of each game for specific operation and instructions. Services Internet your mobile Internet support based on wireless application protocol (WAP) service. You can access a variety of WAP service.
Set the time of alarm clock, ring signal, ring mode, alarm ring mode and interval between repeated alarm rings. calendar calendar this feature allows you to view the calendar. In the calendar interface, press left soft key, you can make a new schedule, check the schedule, all schedule, empty, empty all, go to the date that day, weekly show operation, etc. Calculator Your cellular phone has a built in calculator. Enter the numbers with the keypad. Torch Turn on or off the flashlight.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
accessories that maintain an 10mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.