User's Manual

Gsou H3 Smart speaker
Thanks for purchasing the Gsou H3 Smart speaker.
Please take the me to follow the instrucons in this User manual
carefully. If you have any queries, please call our naonal service hotline:
400-0985-400
1. To reduce the risk of fire or electric shock, be sure the electrical circuits
are not overloaded.
2. To reduce the risk of electronic shock, be sure not plug the adapter with
wet hands.
3.Unplug the power cable if your device is smoking or abnormal and seek
professional help from your nearest service center, be sure not detach the
device yourself.
4.To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture. Liquids can cause a failure and/or a fire hazard.
5. In order to prevent a short circuit, the power cable and audio cable
should not be twisted or dragged in case of short circuit.
6.Do not place the speaker near any open flame sources, such as lighted
candles.
7. The safety temperature of Lithium Baery should not exceed 80℃.
8. Please avoid strong shock and vibraon to the screen, do not put
pressure on the display surface.
Warnings and Cauons
Charging
1. Connect the USB charging cable to the USB port of computer or 5
voltage charger for charging.(Note：Please use high quality USB charger to
avoid sound abnormal or damage for the baery or speaker itself.)
2. The baery indicator on the display will be steadily on during the
charging,and it will goes out aer fully charged. The charging me will be
about 4 to 5 hours, and would be influenced by different charger.
3. Low Baery Indicator:The low baery indicator will be flash when the
baery voltage lower than 3.45-3.5V.
Connecng
1. Please turn on the bluetooth device and H3 speaker, searching Gsou H3
and connect.( if need password in case, please try 0000);
2. Turn the music player on your device to play music.
FM
1. Short press into FM mode
2. press more than 2 seconds, the speaker will search the FM staon
automacally (FM Frequency: 7.5MHZ-108MHZ), Short press
Play/Pause switching to me seng mode.
Time seng
1. Long press switching to me seng mode,then clock images will be
flashing on the display (Tips: the me seng mode will be shut down
automacally if there is no any operaon within 8 seconds);
2. Press+/- for seng Hours;
3. Short press again can set the Minutes, then Minutes images part will
be flashing, press +/- to set the Minutes;
4. Short press again to confirm the seng and exit.
Alarm seng mode (Press any key can shut down the alarm clock when
the alarm rings).
1. Long press buon switching to alarm seng mode (Tips: Non
working under FM mode); the alarm seng mode will be shut down
automacally if there is no any operaon within 8 seconds);
2. Short press +/- buon, then select ON to turn on the alarm clock (select
OFF for turning off alarm);
3. Short press buon switching to alarm clock ‘Hour’ seng mode.
Then the ‘Hour’ images will be flashing on the screen.Press +/- for seng
me.;
4. Short press buon switching to alarm clock ‘Minutes’ seng mode.
Then the ‘Minutes’ images will be flashing on the screen.Press +/- for
seng me;
5. Press buon again to confirm the sengs and exit;
6. The alarm clock will be work even although the speaker was already
turn off.
The Gsou trademark and logo are registered trademarks of Gsou Technology
(Shenzhen)Co.,Ltd. All Rights Reserved. All other trademarks, logos or service
marks are the property of their respecve owners.
Driver spec：
Size：
Net weight：
RMS：
Frequency response：
Sensivity：
S/N rao：
Distoron：
Working distance：
Transmission Power：
Bluetooth profiles：
Working current：
Working voltage：
Charging voltage：
Charging current：
Φ57mm 4Ω/ 8W
112x104x56mm
360.0g
5.5W
70HZ-18KHZ
80db
≥-80 db
≤0.4% @1W
about 33 feet
Class2 Class2, 4dbm
A2DP, AVRCP, HFP
≤600mA
3.7V
DC 5V
700-800MA
Operaon Instrucon
Standard Accessories
Specificaons
Structure Introducon
Gsou Technology (Shenzhen)Co.,LTD
Add:14c, Block A, First World plaza, No.7002 West Hongli Road,
Fuan District, Shenzhen, China.
Tel: [phone] Fax:[phone]
E-mail: [e-mail]
Website: www.gsoutech.com
Contact Us
This device complies with Part 15 of the FCC Rules. Operaon is subject to the
following two condions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operaon.Changes or modificaons not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. However,there is no
guarantee that interference will not occur in a parcular installaon.
If this equipment does cause harmful interference to radio or television
recepon,which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separaon between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit differenrom that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Warnings
Power buon: press longer than 2 seconds to turn on/off. Press
at least 8 seconds to reset if the speaker is frozen;
Play/pause buon:
Mode switch buon: short press to switch between modes.
Short press to receive incoming call, press again to hang up. Long
press it to reject calls, later enter into bluetooth pairing status;
Soundtracks/ Volume control: short press for next track and long
press for volume up;
Soundtracks/ Volume control: short press for previous track and
long press for volume down;
Microphone: enabling hands-free communicaon.
short press is for adjusng the lightness of display
screen(there are 3 types choice).long press is for adjusng
the me.long press +/- for set clock.
DC-IN micro-USB Port:
1.Connect the USB cable with PC or adaptor for charging；
2.USB Connect USB cable with PC USB Port, TF card is
readable when speaker is off;
3.Connect USB cable with PC USB Port, press M buon to
switch the mode for playing music when speaker is on;
Insert the audio cable into the AUX-in jack. The speaker will
disconnect the Bluetooth automacally.
FM Wire Antenna