Installation Instructions

PAGE 1
Installation: 6T-A19-10PK3 | 800LM/9W A19 Bulb E26 Base ® . WARNING: Gt Lite CTT YE gal TE SHUT OFF POWER BEFORE Complete LED Lighting Solutions JIE PYRITE TTR MEE e101 TROUBLESHOOTING GUIDE: Problem Probable Cause | Solution _ Installation: GT-A19-10PK3 | 800LM/9W A19 Bulb E26 Base Fixture does Bad connection. | Check wiring connections. 355-1050 not turn on. Faulty switch, Test switch or replace it. Power is off. Verify power supply is on.
PAGE 2
Installation: GT-A 9-10PK3 | 800LM/9W A19 Bulb E26 Base Installation: GT-A 9-10PK3 | S800LM/9W A19 Bulb E26 Base ADDITIONAL WARNINGS: NOT USE WITH DIMMER. This bulb is not compatible with dimmer switches. (Using this lamp with dimmer of any kind will void the warranty.) « Not compatible with photoelectrically sensors rated less than 150W. * Not compatible with ballasted fixtures. Ballast must be bypassed if present. If unsure how to retrofit MHZ/HPS light fixtures call a qualified electrician.