WARNING: GT-L TO AVOID RISK OF ELECTRICAL SHOCK, @» Lite Rl Y Complete LED Lighting Solutions It ATV LET TN S MRS o 1 Installation: GT-BU-1800 | 1800LM/20W Motion Detecting LED E26 Bulb Lumen: 1800LM Watts: 20W Equivalent to 100W Incandescent Fritter 7 A Motion LED Lifespan: 25,000 Hours Sensitivity Operating Voltage: 120V Time Setting CRI: 80 L cl Light Color Temp (CCTV: S000K Daylight N Sensitivity Base: E26 / Standard Edison Base D: Motion Wet Rated for Outdoor Use .
Installation: GT-BU-1800 | 1800LM/20W Motion Detecting LED E26 Bulb A ADDITIONAL WARNINGS: A Do not dismantle this light. There are NO replaceable LED or serviceable parts. This product needs to be grounded properly in a manner consistent with local electrical codes and the current NEC. If the installer does not understand basic wiring/how to properly ground the fixture, please consult a qualified electrician. Do not install this light inside of undersized enclosures.
Installation: 6-BU-1800 | 1800LM/20W Motion Detecting LED E26 Bulb INSTALLATION INSTRUCTIONS: 1. Before installing the bulb, shut off power supply at the circuit breaker panel 1o avoid electrical shock. It is recommended that surge/lightning protection be installed. This bulb is not compatible with any ballasted fixture. 2. Remove old bulb. 3. Screw in new LED Motion Detecting bulb. (Lamp should be mounted with motion sensor (D) facing down* towards the area where motion will occur.
Installation: GT-BU-1800 | 1800LM/20W Motion Detecting LED E26 Bulb INSTALLATION DIAGRAM: L Lo—m— (Live) _, (Live) E26 CFL E26 LED Bulb TROUBLESHOOTING GUIDE: Problem Probable Cause = Solution Fixture does Bad connection. Check wiring connections. not turn on. Faulty switch. Test switch or replace it. Power is off. Verify power supply is on. Cultural breaker trips | Discontinue use | Call customer service at 1-800-865-6799 or fuse blows when | Immediately. Call an electrician. light Is turned on.
