WARNING: GT-L TO AVOID RISK OF ELECTRICAL SHOCK, @» Lite Rl Y Complete LED Lighting Solutions It ATV LET TN S MRS o 1 Installation: | LED Utility E26 Bulb Lumen: 10,000LM Watts: 130W Equivalent to 500W Incandescent LED Lifespan: 25,000 Hours Operating Voltage: 120V AC CRI: 80 Color Temp (CCTV: 5000K Daylight Base: E26 / Standard Edison Base Damp Rated Operating Temperature: -4°F to 113°F (-20°C to 45°C) This bulb cannot be used on fixtures or any other ballasted fixtures.
Installation: | LED Utility E26 Bulb A ADDITIONAL WARNINGS: A Do not dismantle this light. There are NO replaceable LED or serviceable parts. This product needs to be grounded properly in a manner consistent with local electrical codes and the current NEC. If the installer does not understand basic wiring/how to properly ground the fixture, please consult a qualified electrician. Do not install this light inside of undersized enclosures.
Installation: | LED Utility E26 Bulb INSTALLATION INSTRUCTIONS: 1. Before installing the bulb, shut off power supply at the circuit breaker panel to avoid electrical shock. It is recommended that counterinsurgency protection be installed. This bulb is not compatible with any ballasted fixture. 2. Remove old bulb. 3. Screw in new high lumen utility bulb. 4, Restore power. 5. Turn on light switch. Bulb will illuminate immediately. (Live) QVAOZL E26 LED Lamp (Neutral) E26 CFL (Neutral) o Contact Gt Lite 1 800.
Installation: | LED Utility E26 Bulb TROUBLESHOOTING GUIDE: Problem Probable Cause | Solution Fixture does Bad connection. | Check wiring connections. not turn on. Faulty switch. Test switch or replace it. Power s off. Verify power supply is oh. Circuit breaker trips | Discontinue use | Call customer service at 1-800-865-6799 or fuse blows when | immediately. Call an electrician. light Is turned on. CLEANING INSTRUCTIONS: 1. Turn power OFF. 2. Use a soft cloth and a mild, non-abrasive glass cleaner. 3.
