WARNING: GT-L T0 AVOID RISK OF ELECTRICAL SHOCK, @ Lite SHUT OFF POWER BEFORE Complete LED Lighting Solutions 1T AMITY, Assembly & Installation: GT-CB-25 | High Lumen LED Bulb * Lumen: 2500 LM * Watts: 25W * Lumen Efficacy: 100 » LED Lifespan: 25,000 Hours « Color temperature (Kelvin): 5000K » Operating Voltage: AG120-277V 50/60Hz * Beam Angle: 360" *CRI: 80 « Base: E26 / Standard Edison Base » Equivalent: 150W Incandescent / 40W Fluorescent (GFL) + IP Rating: 20 » Minimum starting temperature: -10°F {Tempo
Assembly & Installation: GT-CB-25 | High Lumen LED Bulb A ADDITIONAL WARNINGS: A « Do not dismantle this light. There are NO replaceable LED or serviceable parts. * This product needs to be grounded properly in a manner consistent with local electrical codes and the current NEC. If the Installer does not understand basic wiring/how to properly ground the fixture, please consult a qualified electrician. « If unsure how to retrofit MHZ/HPS light fixtures, call a qualified electrician.
Assembly & Installation: GT-CB-25 | High Lumen LED Bulb INSTALLATION INSTRUCTIONS: 1. Before starting to install the lamp, shut of power supply at the circuit breaker panel to avoid electrical shock. Ballast must be bypassed. It is recommended that surge/lightning protection be installed. 2. Lamp may be mounted with the base up, down, or horizontal. 3. Remove old bulb. 4, Screw in new high lumen bulb. 5. Restore power.
Assembly & Installation: GT-CB-25 | High Lumen LED Bulb TROUBLESHOOTING GUIDE: Problem Probable Cause Solution Fixture does Bad connection. Check wiring connections. not tum on. Faulty switch. Test switch or replace it. Power is off. Verify power supply Is on. Cultural breaker trips ~ Discontinue use Call customer service at 1-800-865-6799 or fuse blows when immediately. Call an electrician. light is turned on. CLEANING INSTRUCTIONS: 1. Tum power OFF. 2.