WARNING: GT-L TO AVOID RISK OF ELECTRICAL SHOCK, @» Lite Rl Y Complete LED Lighting Solutions It ATV LET TN S MRS o 1 Installation: GT-CTN-40 | 5200LM/40W LED High Lumen E26 Bulb Lumen: 5200LM Watts: 40W Equivalent to 300W Incandescent LED Lifespan: 25,000 Hours Operating Voltage: 120-277V AC CRI: 80 Color Temp (CCTV: 5000K Daylight Base: E26 / Standard Edison Base Damp Rated Operating Temperature: -4°F to 113°F (-20°C to 45°C) Ballast must be bypassed if present.
Installation: GT-CTN-40 | 5200LM/40W LED High Lumen E26 Bulb A ADDITIONAL WARNINGS: A Do not dismantle this light. There are NO replaceable LED or serviceable parts. This product needs to be grounded properly in a manner consistent with local electrical codes and the current NEC. If the installer does not understand basic wiring/how to properly ground the fixture, please consult a qualified electrician. Do not install this light inside of undersized enclosures.
Installation: GT-CTN-40 | 5200LM/40W LED High Lumen E26 Bulb INSTALLATION INSTRUCTIONS: 1. Before installing the bulb, shut off power supply at the circuit breaker panel 1o avoid electrical shock. It is recommended that surge/lightning protection be installed. Ballast must be bypassed if present. 2. Remove old bulb. 3. Screw in new high lumen bulb. 4. Restore power. 5. Tum on light switch. Bulb will illuminate immediately. L Lo——— {Live) 3 {Live) (Neutral) E26 CFL (Neutral) ‘%fi E26 LED Lamp .
Installation: GT-CTN-40 | 5200LM/40W LED High Lumen E26 Bulb TROUBLESHOOTING GUIDE: Problem Probable Cause | Solution Fixture does Bad connection. | Check wiring connections. not turn on. Faulty switch. Test switch or replace it. Power Is off. Verify power supply Is on. Circuit breaker trips ~ Discontinue use | Call customer service at 1-800-865-6799 or fuse blows when immediately. Call an electrician, light Is turned on. CLEANING INSTRUCTIONS: 1. Tum power OFF. 2.