8S Battery Capacity Meter Il User Instruction 1. 8S Battery Capacity Meter Introduction 8S Battery Capacity Meter is a meter device which could detect status of battery. The battery type includes mostly chargeable batteries. Battery type: Li-ion, Li-PO, Li-Fe, Li-H, Ni-Cd and Nigh. The device supports 2-8 Lithium battery (Li-Po, Li-ion, Li-Fe, Li-H) when the battery do not need to be powered up.
Pr Servo Test Range Setting Servo Test Signal Range setting: Sound switch setting: on, off 500-2500us Remind Tone Switch Sating 4. Lithium Battery Detect Mode Connect balance wire plug of Lithium battery (Li-Po, Li-Lon, LI-Fe, LI-H} which Is ready to be detected to Spin Lithium Port of 88 Battery Capacity Meter.
CUBE 5V system. The unit starts to work after connecting power supply properly. The power supply uses Nickel battery port, and screen display Nickel Battery Detect Mode. At this time, it could be confirmed whether the Nickel battery voltage on the screen and working voltage of servo is matched. If not, the power supply for 85 Battery Capacity should be changed to the same with power supply for Servo. It may burn up the servo if voltage of power supply and servo does’ t match.