User's Manual

User Manual
LEXI Light Bulbs
Smart Color & Tunable White
WELCOME TO LEXI
USER GUIDE
1. Power on your LEXI Hub ( make sure
your LEXI Hub is ready to add device(s)
and work properly with the LEXI App at
your smart devices )
2. Power on your light source(s), you'll see
the light(s) flashing with white color
3. Select "ADD NEW DEVICE" at the LEXI
App and follow the instruction to
complete adding the device(s), you'll see
the light stopped flashing.
4. Your devices is added to the LEXI
system successfully and ready to use.
5. To learn more about detail function
and special effect, Please go to
www.lexidevices.com
WARNINGS AND CAUTIONS:
- BEFORE REPLACING, TURN OFF MAINS
POWER AND LET LAMPS COOL TO AVOID
ELECTRICAL SHOCK OR BURN.
- NOT FOR USE IN ENCLOSED LUMINAIRES
- This device is not intended for use with
emergency exits.
- The bulb is not suitable for use with
dimmers
- Keep away from liquids and humidity.
- The product is for indoor use only. Do not
use in wet locations, directly exposed to
water or outdoors.
- This product is not a toy designed to be
played with by children.
- Do not place on hot surfaces.
- For safety reasons and under the terms of
the warranty, none of the enclosed
devices should be opened.
- Only use the adapter supplied: using a
different adapter can damage the
product.
WARRANTY:
LEXI provided one-year warranty is valid if
the product is used in accordance with
the instructions and for its intended
purpose. Claims will only be accepted on
submission of the original proof of
purchase (invoice, sales slip or receipt)
stating the purchase date, the name of
the dealer and a description of the
product with product ID labeled at the
products.
The LEXI’s warranty lapses if:
a. Anything has been changed, crossed
out, deleted or rendered illegible on the
purchase docket or product description.
b. The failure is caused by damage, faulty
connections or abuse.
c. A defect is caused by extreme
circumstances not inherent to the
product, for example, lighting, flooding,
fire, incorrect use or negligence.
d. The product has been opened or
disassembled.
TROUBLESHOOTING
- Ensure your device is within 15 meters
without obstacle block the LEXI hub and
lights
- Ensure your smart device turned on
Bluetooth and location.
- Check the power On/Off switch is
located at On position.
- Make sure the light is screwed in the
socket completely.
- Confirm device is paired with LEXI Hub
- Just in case, you can un-pair the li
g
hts by
6 times power cycle the light, afterwards,
you'll see a cool white flashing. ( A warm
white will be flashing at the 5th power
cycle which is a warning signal for you. If
you don't want to un-pair it, stop the
power cycle. The light will go back to the
last state). Then, re-pair this light as the
user guide.
WIRELESS SPECIFICATION:
BLE Frequency: 2402-2480MHz
Wireless communication protocol: IEEE
802.15.4
Channel: 0 -39 channels
ENVIRONMENTAL SPECIFICATION:
Temperature (operation): -10...40°C
Temperature (storage): -25...60°C Relative
humidity: 5-95% non-condensing
CLEANING AND MAINTENANCE:
Do not clean when the product is on and
connected to mains power. To avoid
scratching, the product should only be
cleaned with a soft dry cloth. Do not use
cleaning agents.
PLEASE KEEP THIS PACKAGING FOR FUTURE
REFERENCE AS IT CONTAINS IMPORTANT
INFORMATION.
DISPOSAL OF YOUR OLD PRODUCT:
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused. When
this crossed-out wheeled bin symbol is
attached to a product it means the
product is covered by the European
Directive 2002/96/EC.
Please find out for yourself about the local
separate collection system for electrical
and electronic products. Please act
according to your local rules and do not
dispose of your old products with your
normal household waste. The correct
disposal of your old product will help
prevent potential ne
g
ative consequences
for the environment and human health.
FCC WARNING AND CAUTION:
- This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
- Changes or modifications to this unit not
expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
FCC ID : Stated at the Item list
- Shielded Cables must be used with this
unit to ensure complaince with the Class B
FCC limits
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are desi
g
ned
to provide reasonable protection against
harmful interference in a residential
installation.
This equipment generates, uses and can
radiate radio frequency ener
g
y and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turnin
g
the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
Item
10005 - GU10 bulb Smart Color & Tunable
White
FCCID: 2ATOT10005