System Instruction

13
OPEN THE BODY OF THE RC BOAT
Rotate 45 degrees
Open boat cover
Open the plate
14
1. When using,connect the remote control and speedboat to the code.Put the speedboat into the water,push
the remote control throttle backwards/forward,the propeller rotates,and the speedboat advances/reverses.
While the remote control throttle is pulled backward/forward,turn the direction knob to the left/right direction,
and the speedboat turns left/Turn right When the battery is low,the ship will send a signal to the remote
control.The remote will emit a drip,indicating that the battery is insufficient and the speed of the ship will drop
rapidly.Please drive the ship back in as soon as possible.
METHOD OF OPERATION
2. Before use to determine without interference around
Note! (1) users under 14 years old must be supervised by an adult action.
(2) prohibit someone swimming in the pool or sailing waters in order to avoid injury.
(3) observe the water before sailing into the water without debris,if too much debris,
sailing boats may Entangled in the propeller will be suspended, the water is not
recommended in these operating boats.
3. When not using the boat,remove the remote control and the boat battery.
4. The radius of about 100 meters remote control speedboat product,please be carefull not
to exceed the remote range to avoid runaway.
5. When the boat left the water propeller,propeller automatically stops.
7. When you want to change the speed of the speedboat,you can switch by the rudder size
button.(see Figure 2)
8. If the speedboat is overturned in the water,the front and rear triggers can be quickly turned
to turn the speedboat to the front(see Figure 3)
6. Adjust the direction of the remote control to adjust the straight-line performance of the
speedboat.When the ship is driving to the left.(see Figure 1).
Press the arrow direction to unlock