Operation Manual Model: LED40YD11000UA CHANGHONG TRADING CORP., USA 17800 Castleton St. Suite 306, City of Industry, CA 91748 TEL: 1(626)965-2688 FAX: 1(626)965-6998 Service E-mail: info@changhongusa.com Web site: www.changhongUSA.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Warning WARNING To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. The Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Attention should be drawn to the environmental aspects of battery disposal. Don’t throw used batteries in dustbin.
Warning Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety instructions IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 5. Do not use this apparatus near water. 8. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Clean only with a dry cloth. 9.
Safety instructions 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 11. Only use the attachments/ accessories specified by the manufacturer. 14. Refer all servicing to qualified service personnel.
Getting Started Using the Remote Control When using the remote control, aim it at remote sensor on the television. If there is an object between the remote control and the remote sensor on the unit, the unit may not operate. • Point the remote control at the REMOTE SENSOR located on the television. • When using this television in a very brightly lit area, the infrared REMOTE CONTROL SENSOR may not work properly. • The recommended effective distance for using the remote control is about 7 metres.
Connection and Setup Cable Installation Before the installation and use, please read carefully the relevant content in “Warning and Safety instructions”. 1. Take out the TV from the wrapping package and put it in a drafty and flat place. NOTE: • When you plug or unplug the TV, computer or other equipments, you must make sure that the AC power has been already shut down; • When unplugging the power cable or signal cable, please hold the plug (the insulated part), do not draw the body of the cable. 2.
Connection and Setup Installation Guide When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the ENTER button to start the guide. Press the ► button to go to the next step. Press the ◄ button to return to the previous menu. ■ Language: Press the ▲/▼ button to select the desired language using the OSD(On Screen Display). ■ Time Zone: Press the ▲/▼ button to select your time zone. ■ Time Format: Press the ▲/▼ button to select 12-hour or 24-hour.
Remote Control The buttons of the original remote control are as following: Definition of the buttons on the remote control: : Enter or quit the standby mode. 1. : Mute or restore sound. 2. 3. TV/AV/HDMI/USB: Quick enter signal source. 4. COLOR BUTTONS: Red/green/yellow/blue key navigation link. : Fast reverse (in USB mode) : Fast forward (in USB mode) : Previous (in USB mode) : Next (in USB mode) 5. MTS: The button can be used to switch between OK Stereo/SAP/Mono in TV mode.
Basic Operation Turning on and off the TV ■ Turn on the TV Connect the power cable, and press the button to turn on the TV. ■ Turn off the TV Press the button on the remote control to enter standby mode. Do not leave your set in standby mode for long periods of time. It is best to unplug the set from the mains and aerial. When there is an accident power off, it is recommended to unplug the power cable from the power socket. ■ No signal There is No Signal menu on screen when there is no input signal.
Menu Operation How to Navigate Menus Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions. The access step may differ depending on the selected menu. 1. Press the MENU button to display the main menu. 2. Press the◄/►button to cycle through the main menu. Press the ENTER button to access the submenu. 3. Press the▲/▼button to select the desired sub item, then press the ENTER button. 4.
Menu Operation Configuring the Picture Menu ■ Picture Mode: You can select the type of picture which best corresponds to your viewing requirements. Mode: Changes the image mode. Contrast: Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness: Adjusts the base level of the signal in the picture. Sharpness: Adjusts the level of crispness in the edges between the light and dark areas of the picture.
Menu Operation ■ Balance: You can adjust the sound balance of the speakers to preferred levels. ■ AVC: AVC automatically remains on the same level of volume if you change programs. Because each broadcasting station has its own signal conditions, volume adjustment may be needed each time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program. ■ SRS: You can select a desired Surround Sound mode.
Menu Operation Content Define FV Fantasy violence D Suggestive dialogue L Strong language S Sexual situations V Violence MPAA Rating Define G General audience. All ages admitted. PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned. Some material may be inappropriate for children under 13. R Restricted. Children under 17 require accompanying parent or adult guardian. NC-17 No one 17 and under admitted.
Menu Operation Rating Defined as G General 8 ans+ Not recommended for younger children 13 ans+ Not recommended for children under age 13 16 ans+ Not recommended for ages under 16 18 ans+ This program is restricted to adults EXEMPT Unblock ■ RRT Setting: Press ENTER button to set RRT rating. If you try to tune the TV to a program that exceeds the rating limits you set, the TV will enter program lock mode and a warning message will appear on-screen.
Menu Operation Mode: Default/Custom. If set to Custom, Digital CC is available.
Menu Operation Using USB mode ■ To Access/Quit USB mode Connect an USB device. Press INPUT button to display the main menu. Use the ▲/▼ to highlight USB, and the ENTER button to access the USB mode. You may also use the signal source selection menu to exit from the USB mode. NOTE: • A special USB device may not be supported, and may either not operate, not be recognized, or operate erratically. • USB max. load: DC5V@500mA. ■ The formats supported Movie and Music Show: MPEG2, MPEG2_HD, DD, MJPEG.
Troubleshooting Guide Troubleshooting Before contacting a service technician, perform the following simple checks. If any program still persists, unplug the TV and call for service. Symptoms No picture, no sound, and no indicator light on Abnormal picture and sound Possible Reason Solutions 1.The power cord is not plugged in 1.Plug the power cord in 2.The power is off 2.Turn the power on 1.Contrast, sharpness, and color are set improperly 2.Color system is set improperly 3.
Troubleshooting Guide HDMI source, with snowy pixels in full screen The input source is not standard Plug the HDMI cable again 1. Make sure the positive and the negative polarities are correct. The remote control does not work Batteries are improperly installed or exhausted 2.Check whether there is a loose contact between the batteries and the springs 3.Replace the batteries Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the life of your new TV.
Specifications Key Features 1 Model LED40YD1100UA 2 Digital TV or ATV ATSC/NTSC 3 Area North America 4 Display Technology DLED 5 2D/3D(2D/PR 3D/SG 3D) 2D 6 Refresh Rate EMR120 7 Aspect Ratio 16:9 8 Resolution 1920*1080 9 Energy Grade 10 ID Features 11 Main Function ENERGY STAR 6.
Specifications 18 Life Time ＞30,000hrs (min) 19 Color 16.
Specifications 46 SPDIF Coaxial ACCESSORIES 47 Screws 48 Bracket 49 Rubber gaskets 2 50 Batteries 2 51 Stand Mounting Guide 1 52 Warranty card 1 53 Operation Manual 1 54 Quick Start Guide 1 55 Remote control 1 56 Roku Propaganda label 1 Stand Screws x4(4*12) Bracket Screws x2(3*10) 2 BASIC Info.
Installation Instructions for the Flat Panel Support Bracket: 1.The flat panel can easily topple over due to external force, as shown in the following figure, which should be prevented. 2.Two brackets on the rear cover of the flat panel are required to be installed. Refer to the diagram shown below for installation location. Bracket×2 Screws×2 3.Finally, the flat panel is assembled as shown in the following figure to prevent from toppling over due to any external force. Remarks: 1.
