Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Warning WARNING To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. The Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Attention should be drawn to the environmental aspects of battery disposal. Don’t throw used batteries in dustbin.
Warning Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety instructions IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 5. Do not use this apparatus near water. 8. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Clean only with a dry cloth. 9.
Safety instructions 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 11. Only use the attachments/ accessories specified by the manufacturer. 14. Refer all servicing to qualified service personnel.
Getting Started Using the Remote Control When using the remote control, aim it at remote sensor on the television. If there is an object between the remote control and the remote sensor on the unit, the unit may no operate. • Point the remote control at the REMOTE SENSOR located on the television. • When using this television in a very brightly lit area, the infrared REMOTE CONTROL SENSOR may not work properly. • The recommended effective distance for using the remote control is about 7 metres.
Connection and Setup Cable Installation Before the installation and use, please read carefully the relevant content in “Warning and Safety instructions”. 1. Take the TV from the wrapping package and put it in a drafty and flat place. NOTE: • When you plug or unplug the TV, computer or other equipments, you must make sure that the AC power has been already shut down; • When unplugging the power cable or signal cable, please hold the plug (the insulated part), do not draw the body of the cable. 2.
Connection and Setup Installation Guide When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the ENTER button to start the guide. Press the ► button to go to the next step. Press the ◄ button to return to the previous menu. ■ TV Mode: Press the ▲/▼ button to select the retail or home. ■ Language: Press the ▲/▼ button to select the desired OSD (On Screen Display) language. ■ Time Zone: Press the ▲/▼ button to select your time zone.
Remote Control The buttons of the original remote control are as following: TV AV FAV AUDIO HDMI USB CC STILL MTS CH LIST INFO MENU ENTER EXIT RECALL 21 SOUND VOL CH 20 PICTURE 22 23 24 SLEEP NOTE: • All pictures in this manual are examples, only for reference, actual product may differ from the pictures. • The buttons not mentioned here are not used. 25 Definition of the buttons on remote control: 1. : Enter or quit the standby mode. 2. : Mute or restore sound. 3.
Basic Operation Turning on and off the TV ■ Turn on the TV Connect the power cable, and press the button to turn on the TV. ■ Turn off the TV Press the button on the remote control to enter standby mode. Do not leave your set in standby mode for long periods of time. It is best to unplug the set from the mains and aerial. When there is an accident power off, it is recommended to unplug the power cable from the power socket. ■ No signal There is No Signal menu on screen when there is no input signal.
Menu Operation How to Navigate Menus Before using the TV follow the steps below to learn how to navigate the menu in order to select and adjust different functions. The access step may differ depending on the selected menu. 1. Press the MENU button to display the main menu. 2. Press the◄/►button to cycle through the main menu. Press the ENTER button to access the submenu. 3. Press the▲/▼button to select the desired sub item, then press the ENTER button. 4.
Menu Operation Configuring the Picture Menu ■ Picture Mode: You can select the type of picture which best corresponds to your viewing requirements. Mode: Changes the image mode. Contrast: Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness: Adjusts the base level of the signal in the picture. Sharpness: Adjusts the level of crispness in the edges between the light and dark areas of the picture.
Menu Operation ■ Balance: You can adjust the sound balance of the speakers to preferred levels. ■ AVC: AVC automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program. ■ SRS: You can select a desired Surround Sound mode.
Menu Operation Content Define FV Fantasy violence D Suggestive dialogue L Strong language S Sexual situations V Violence MPAA Rating Define G General audience. All ages admitted. PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned. Some material may be inappropriate for children under 13. R Restricted. Children under 17 require accompanying parent or adult guardian. NC-17 No one 17 and under admitted.
Menu Operation ■ RRT Setting: Press ENTER button to set RRT rating. If you try to tune the TV to a program that exceeds the rating limits you set, the TV will enter program lock mode and a warning message will appear on-screen. Follow the instructions to temporarily unlock the program. ■ Reset RRT: Press ENTER button to reset RRT information. NOTE: • RRT setting and Reset RRT can be selected when the TV signal have RRT rating information.
Menu Operation ■ Reset: Restore the system settings to the factory default. When the restore is complete, the Installation Guide is displayed on the screen. ■ Installation Guide: This is a guide to help you to setup the TV. ■ E-POP: Switch the E-POP on or off. E-POP mode is the optimal setting for store environments. ■ Health Remind: Switch the Health Remind on or off. While Health Remind is set to On, a prompt picture will remind you to have a break at intervals of two hours.
Menu Operation Using USB mode ■ To Access/Quit USB mode Connect an USB device. Press button to display the main menu. Use the ▲/▼ to highlight USB, and the ENTER button to access the USB mode. You may also use the signal source selection menu to exit from the USB mode. NOTE: • Special USB device may be not or well supported. • USB max. Load: DC5V 500mA. ■ The formats supported Movie and Music Show: MPEG2, MPEG2-HD, TSHD, DD, MJPEG. Photo Show: JPEG. File Format Show: TXT.
Troubleshooting Guide Troubleshooting Before contact the service technician, perform the following simple checks. If any program still persists, unplug the TV and calling for serving. Symptoms No picture, no sound, and no indicator light on Picture and sound with abnormity Possible Reason 1.The power cord is not plugged in 1.Plug the power cord in 2.The power is off 2.Turn the power on 1.Contrast, sharpness, and color are set improperly 2.Color system is set improperly 3.
Troubleshooting Guide 1. Make sure the positive and the negative polarities are correct. The remote control does not work Batteries are improperly installed or exhausted 2.Check if there is a loose contact between the batteries and the springs 3.Replace the batteries Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Specifications Key Features 1 Model LED42YC2000UA 2 Digital TV or ATV ATSC/NTSC 3 Area North America 4 Display Technology DLED 5 2D/3D(2D/PR 3D/SG 3D) 2D 6 Refresh Rate EMR120 7 Aspect Ratio 16:9 8 Resolution 1920*1080 9 Energy Grade ENERGY STAR 6.
Specifications 18 Life Time ＞30,000hrs (min) 19 Color 16.
Specifications 46 SPDIF Coaxial ACCESSORIES 47 Screws 3 48 Batteries 2 49 Stand Mounting Guide 2 50 Warranty card 1 51 Operation Manual 1 52 Quick Start Guide 1 53 Remote control 1 BASIC Info. 54 TV System ATSC(DTV) NTSC (ATV) 55 AV System NTSC 56 Channels Air(CH2~CH69) Cable(CH1~CH135) 57 Certification ETL FCC ENERGY STAR 58 Power Supply AC 100V-240V 50/60Hz 59 Power Consumption-TV on 85W 60 Power Consumption-Standby ＜0.
