IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand aif instructions. 2. Follow alt wakings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
FCC WANTS YOU TO KNOW . This equipment complies with Part 68 of the FCC Rules. On the bottom of the base of this equipment is a label that contains, among other information, the FCC Registration Number, Ringer Equivalence Number (REN) and the Universal Service Order Code (USO, which is RIC, for this equipment. You must, upon request, provide this information to your telephone company.
is encouraged to try 10 correct the interference by one or more of the following measures: + Reorient or relocate the receiving antenna. + Increase the distance between the equipment and the receiver. + Connect the equipment into an outlet on a circuit different from that fo which the receiver is connected. «Consult the dealer or an experienced radio/TV technician for help. MAY NOT APPLY TO YOU.
Pause Ad-second PAUSE may be inserted into the speed dating of telephone numbers. Press the PAUSE button at the required point during storage of a number in memory. Page/Handset Locator Memory Feature Store up fo 10 numbers in memory for quick dialing. To Program Frequently Called Numbers 1. Pick up the handset, with the TALK button off. Note: if a 17th digit is accidentally pressed or a pause of more than 30 seconds occurs during programming, an sro tone will be heard. Try again.
TROUBLESHOOTING If you experience difficulty in operating your cordless phone, try the suggestions below. If the trouble persists, Cali the Southwestern Bell Freedom Phone® Retail Sees Colt Free Help Line at 1.800 366-0937, Monday-Friday 8:30 am. 9:00 p.m. and Saturday 8:30 a.m. 12:30 p.m. (EST). You can also visit our website at swhfreedomphone.com The unit will not operate/ no dial tone: ~ Make sure the TALK button is iit + Make sure the AC adapter is plugged into the base unit and wall outlet.
INSTALLATION A caution 1. Never install a telephone during a lightning storm. 2. Aver install a telephone in a wet location. 3. Never touch insulated telephone wires or terminals. 4. Use caution when installing a telephone line A Use only with Case 2 Power Source 12VDC, 200mA. 120 Volt Outlet/ Telephone Jack 1. This phone requires a modular phone jack (R411) and a standard 120 volt outlet. 2. Plug the phone directly into a 120 vomit outlet 3.
| ET INSTALLATION Antennas Adjust the base unit antenna to upright position. Set Tone/Pulse Switch Set #e dialing mode applicable to your area by setting the switch (back of base unit} to either TONE or PULSE. BL: i Housetop — {| blossomy | amazement sous ara | Please check with your local phone company if you are uncertain of the type of service. Ringer ON/OFF Set the ringer switch {left side of marquisette} to ON or OFF. Ringer switch must be set to ON for handset fo ring when receiving incoming calls.