Specifications

ManualsBrandsGuangdong Dudao Technology ManualsAudio EquipmentBluetooth Earphone

2.4GHz 3216 Chip Antenna: RANT3216F245C03

Electrical Specification

The specification is defined on EVB.

Dimension and Terminal Configuration

Application:

WLAN, 802.11b/g, Bluetooth, WLAN, etc…

Features

SMD, high reliability, ultra Impact, Omni-directional…

Part number Information

RANT

(A)

3216

(B)

(C)

245

(D)

(E)

(F)

Working Frequency Range 2400 ~2500 MHz

Bandwidth 120 MHz (Min.)

Peak Gain 1.24 dBi (Typ.)

Impedance

50 Ohm

Return loss 10 dB ( Min)

Polarization Linear

Azimuth Beamwidth Omni-directional

Operation Temperature(

℃

)

-40 ~85

℃

Resistance to Soldering Heats

10sec. ( @ 280

℃

)

Termination Ni / Au (Leadless)

咏成國際科技有限公司電話 :

13530576606

Dimension (mm)

3.20 ± 0.20

1.60

0.20

0.45 ± 0.20

No.

Terminal Name

Feeding/GNG

GND/Feeding

(A)Product Type Chip Antenna

(B) Size Code

3.2x1.6mm(

0.2mm)

(D) Frequency 2.4 ~ 2.5GHz

(E) Feeding mode PIFA & Single Feeding

(F) Antenna type Type=03

Summary of content (6 pages)

PAGE 1
2.4GHz 3216 Chip Antenna: RANT3216F245C03 Application: WLAN, 802.11b/g, Bluetooth, WLAN, etc… Features SMD, high reliability, ultra Impact, Omni-directional… Part number Information RANT (A) 3216 (B) F (C) 245 (D) C (E) 03 (F) (A)Product Type Chip Antenna (B) Size Code (C) Material 3.2x1.6mm(±0.2mm) High K material (D) Frequency 2.4 ~ 2.
PAGE 2
.4GHz 3216 Chip Antenna: RANT3216F245C03 Evaluation Board Reference 长条板PCB 推荐 Dimension 圆板Antenna Layout Reference Unit :mm Electrical Characteristics Return Loss & Radiation Return Loss 1 Frequency(MHz) S11 (dB) 2400 -10.50 2450 -30.62 2500 -11.
PAGE 3
2.4GHz 3216 Chip Antenna: RANT3216F245C03 Radiation 2400MHz 2500MHz 2450MHz Z X 2400MHz 2450MHz 2500MHz Efficiency 82.52% 85.26% 83.01% Peak Gain 1.15 dBi 1.24 dBi 1.19 dBi Directivity 1.89 dBi 1.97 dBi 1.
PAGE 4
2.4GHz 3216 Chip Antenna: RANT3216F245C03 Taping Specifications Reel and Taping Specification Reel Specification TYPE SIZE 3216 7” 5K/Reel A B C D 9.0±0.5 60±2 13.5±0.5 178±2 Tapping Specification Packaging Type Paper Type 3216 A B W E F G H T ψD 1.90±0.2 3.50±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.10 2.0±0.05 0.75±0.1 1.50±0.1 0 0 0 0 0 0 P 4.0±0.
PAGE 5
2.4GHz 3216 Chip Antenna: RANT3216F245C03 Reliability Table Test Item Procedure Electrical Characterization Requirements Ceramic Type Remark (Reference) Fulfill the electrical specification User Spec. Thermal Shock 1. Preconditioning: 50 ± 10℃ / 1 hr , then keep for 24 ± 1 hrs at room temp. 2. Initial measure: Spec: refer Initial spec. 3. Rapid change of temperature test: -30℃ to +85℃; 100 cycles; 15 minutes at Lower category temperature; 15 minutes at Upper category temperature. No Visible Damage.
PAGE 6
2.4GHz 3216 Chip Antenna: RANT3216F245C01 Board Flex (SMD) 1. Mounting method: IR-Reflow. PCB Size (L:100 × W:40 × T:1.6mm) 2. Apply the load in direction of the arrow until bending reaches 2 mm. No Visible Damage. AEC-Q200 005 Adhesion Force of 1.8Kg for 60 seconds. No Visible Damage Magnification of 20X or greater may be employed for inspection of the mechanical integrity of the device body terminals and body/terminal junction.