Installation Instructions

Warranty Card
Warranty regulations
User Name
Contact Phone
Mailing Address
Product Model
Product item no
Shop Name
Purchase period
Problem symptom
Repaired by
Repair date
Problem symptom
Repaired by
Repair date
Problem symptom
Repair date
Repaired by
Repair date
1. This product is guaranteed according to the national “Three Guarantees Law”, with a
warranty period of 12 months.
2. In one of the following circumstances, the product is not included in our warranty
service, but we can provide non-free maintenance
a. Damage caused by improper use, maintenance or storage.
b. Damaged or disassembled by repairer who is not licensed according the national
“Three Guarantees Law”
c. No Three Guaranteescertificate and no valid invoice
d. The Three Guarantees certificate is altered or does not match with product model
e. Damage caused by force majeure.
3. The warranty period is subject to the invoice date and the date of purchase.
1. 4. If the warranty period is exceeded or it is not free of charge, we will also serve you
wholeheartedly.
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two
conditions:
(1) This device may not cause harmful interference, and (2) this devicemust accept any interference received,
including interference that may cause undesired operation. Changes or modifications not explicitly approved
by the partyresponsible for compliance could void the user's authority tooperate this equipment.
Note: this equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to providereasonable protection
against harmful interference in a residential installation. This equipment generates, uses and canradiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference toradio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged totry to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
●Increase the separation between the equipment and any other radio device.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(Comply with standard: EN303417 EN62311 EN301489-1 EN301489-3 EN60950)
Please read the instructions carefully before using this product! This product is intended for use only
in the home, office or similar location.
Wireless heating warm cup instructions
Wireless charger
instructions
2. The indicator light shows the status of the breathing light and is in
a wireless heating state.
3. Applicable equipment
4. Applicable to the company's supporting special mugs, coffee cups, tea
sets, etc., can not be heated for ordinary cups.
5. Safety warning
6. 1.Do not disassemble or modify this product yourself.
7. 2.Please keep the surface of the base clean. If there is any water, please
wipe it with a dry towel or paper towel and use it.
8. 3. To clean the charger, make sure that no power is plugged in.
9. 4. The ambient temperature is maintained at 0-45 ° C
5.It is forbidden to place magnetic materials such as coins and keys or
bank cards on the charger, which will affect normal work.
The wireless charger is equipped with a "wireless charging and heating adaptive switch", which
can effectively prevent the metal body or the mobile phone from being heated and damage the mobile
phone or burn the user, and the heat preservation cup can be automatically switched to the heating
function.
Packing list: 1. Wireless charger 2. Adapter 3. Power cord 4. Ceramic cup 5. Ceramic cup cover
Thank you for choosing our wireless heating and warming cup products. Please read this
instruction carefully before use to understand the correct operation of the product!
Place the phone in the middle of the wireless charger and
the breathing light flashes to the charging state.
Place the phone in the middle of the wireless
charger and the breathing light flashes to the
charging state.
Name: Wireless Charger
Applicable models: MC-801,
Input: 12V/1.5A Charging output: 5V/1A 9V/1.2A 12V/1.5A
Transmission distance: less than 6mm
Charging efficiency: about 83%
LED indicator
Turn on the machine: the light flashes three times
Waiting for the machine: the light is not bright
Power transmission: in the state of breathing light
Protection: flashing lights
Error message: the light is blinking
Applicable equipment
1. Built-in wireless charging receiver (iphone8, iphoneX, Samsung S6, etc.),
2. Equipment with a protective cover for the receiving device (iphone7 series,
etc.) must be installed.
(Note: These receivers must comply with the WPCQI standard for compatibility)
safety warning
1. Do not disassemble or modify this product yourself.
2. Keep the charger and receiver away from water and other liquids.
3. To clean the charger, make sure that no power is plugged in.
4. The ambient temperature is maintained at 0-45 ° C
5. It is forbidden to place metal materials such as coins and keys or magnetic
materials such as bank cards on the charger, which will affect normal work.
Packing list: 1. Wireless charger 2. Adapter 3. Power cord
Thank you for choosing our wireless charger products. Please read this instruction
carefully before use to understand the correct operation of the product!
10. After power-on, place the matching ceramics heating
cup in the center of the base.
11.
12. Name: Wireless heating warm cup
13. Heating power: 20W
Constant temperature: about 55 ° C (more suitable for
human drinking water temperature) Material:
reinforced porcelain
Heating method: wireless induction heating
LED indicator
Turn on the machine: the light flashes three times
Waiting for the machine: the light is not bright
Power transmission: in the state of breathing light
Protection: flashing lights
Error message: the light is blinking