User's Manual

9
OPERATION INSTRUCTIONS
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
AUTO REMINDER:
After total time elapsed, the system will sound beeps with END in display. And the beeps will
continue to sound every two minutes automatically until the door is opened or any pad is
touched.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time.
3. Touch CLOCK pad again.
NOTE:
gThis is a 12-hour cycle clock. When the
oven is first plugged in or when power
resumes after a power interruption, the
display will show ENTER CLOCK TIME. If
you prefer not to have the clock displayed,
touch RESET.
SETTING THE OVEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching the
number pads.
3. Touch START/STOP.
NOTE:
gThe maximum time you can enter is 99
minutes and 99 seconds.
gTime countdown can be seen in display for
5 seconds before clock or cooking time is
returned to display.
gTouch TIMER and then touch RESET to
cancel TIMER during timing process.
SETTING MICROWAVE COOKING
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
2. If you want to set a power level other
than 100% power, touch POWER, then
use the number pads to enter the power
level.
Number pad Cooking power
1,0 100%(100)
9 90%(90)
8 80%(80)
7 70%(70)
6 60%(60)
5 50%(50)
4 40%(40)
3 30%(30)
2 20%(20)
1 10%(10)
0 0%(0)
3. Touch START/STOP to start cooking.
MULTI-STAGE COOKING
You can set at most 3 stages cooking
programs, which combined with speed
defrost program and microwave cooking