User's Manual

3. If the disc becomes dirty, wipe the surface from the center hole outward towards the outer
edge with a soft, dry cloth.
4. Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to
clean the discs. Such chemicals will do irreparable damage to the disc's plastic surface.
5. Discs should be returned to their cases after use to avoid serious scratches that could cause
the laser pick up to skip.
6. Do not expose discs to direct sunlight or high humidity and temperature for extend periods.
Long exposure to high temperatures will wrap the disc.
7. Printable CD-R and CD-RW discs are not recommended, as the label side might be sticky and
damage the unit.
8. Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a
ball-point or hard-tipped pen, as this may cause damage to the recorded side.
9. Do not use CDs with an irregular shape (octagonal, heart-shaped, business card size, etc).CDs
of this sort can damage the unit.
10. If you have any doubts of using CD-R/CD-RW disc, read the precautions supplied with the disc,
or contact the disc manufacture directly.