User's Manual

8. P

Repeat Play:

Press the REPEAT button to step through the available repeat mode – repeat 1, repeat all or off.

Selecting Repeat 1 will continuously repeat the current track, the repeat indicator will flash.

Selecting Repeat All will repeat the entire disc continuously, the repeat indicator stay lit.

When select off, the repeat indicator won’t light up.

NOTE: If play is stopped, repeat modes are cleared.

Programmed Play:

While the disc stops, you can store a programmed selection from the disc in your preferred sequence.

To set a program:

1. Press Stop button to stop CD play.

2. Press Program button.

Program indicator will light up and the 01 will start flashing on the display (the position of this track

in the program).

3. Select a track you want to program by pressing the FF or FR button.

4. To save this track into the program sequence, just press the Program button again.

Then the 02 will start flashing on the display (this is the second track in the program).

5. Repeat step 3 and 4 until you have stored all the tracks in the program sequence.

NOTE: During setting a program do not press the Stop button unless you want to start to set from the

start again.

Playing the program:

Press the Play/Pause button to start the program playing.

Selecting tracks:

You can navigate through the tracks stored in the program by pressing the FF or FR button.

Press the FF button once to go the start of the next track.

Press the FR button once will go back to the start of the previous track.

Clear the program:

Press the Stop button to stop a play.

Press the Stop button again to clear the program, and then the program indicator won’t light.

Repeat modes:

Repeat modes may be selected when a program is playing.

ress STOP button to stop the CD play.