User Manual
Specification Size: 180*180*280mm Weight: XXkg Main materials: ABS Power: AC100~240V 50/60Hz Power consumption: 10W Product overview Control panel Top cover Filter Buttom DC Power Speed: 1/2/3 CADR: Airflow: Noise Level: 35~55 dBA
Air outlet Adapter Air inlet NOTE:Please take notice of below instructions and the separately included warning sheet before using the product. Installation ·Please do not set up in a place where humidity directly hits curtains, furniture, indoor plants or doors. It can cause stains and deformation. ·Please place on a horizontal and stable surface, otherwise the might be a risk of water spilling. ·Please do not set up in a place where only childern are present such as children’s room.
Advantages ·High CADR with True HEPA. ·Purifiy the air through 360° and filter pm2.5 particles. 360° FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
Top:at least 100cm Back:at least 30cm Side:at least 30cm Side:at least 30cm Front:at least 30cm ·Even when it is placed at a sufficient distance from walls or furniture, if it is used in the same place for a long period of time, it can become dirty with scale. We recommend regular cleaning. Please consult chapter 4 for maintenance instructions. ·Please avoid places with direct sunlight. There is a risk that the device discolors.
Power button/WIFI button Press the button for 1st time to turn on the unit with 1 beep.The indicator is in white.Press 2nd time to turn off the unit.Then recycle. Hold the button for 5s when working,the unit will connect WIFI after 1 beep,then the power indicator will flash with red. Remark:In the state of turning-off,the indicator will be off after 3 mins. Night light setting (Light color:red,blue,green,yellow,purple) Indicator When turning on the unit, the default setting is all color cycle one by one.
Sleep mode/Filter reset button Press the button,enter into sleep mode,all LED are off with 1 beep. Press any key to recover the sleep mode with 1st speed automatically.Press again to turn off the sleep mode. When the lifespan of filter used for 4320 hours,the indicator and all LED will flash 10sec with beep.Then all LED and beep turn off.Every 30 mins, the indicator and all LED will flash 3sec.