User's Manual

Press the button for 1st time to turn on the unit
with 1 beep.The indicator is in white.Press 2nd
time to turn off the unit.Then recycle.
Hold the button for 5s when working,the unit will
connect WIFI after 1 beep,then the power indicator
will flash with red.
Remark:In the state of turning-off,the indicator will
be off after 3 mins.
When turning on the unit, the default setting is all
color cycle one by one. When touching the night
light button, you can select the light color currently.
When touching the button for the 2nd time, the
light color will cycle again. Hold on the button for
3 seconds, the night light will be turned off. And
then touch the button again, you can turn on the
night light. In the state of stand-by,the night light
can use individually.
Indicator
Power button/WIFI button
Night light setting
(Light color:red,blue,green,yellow,purple)
Speed button
Turning on the unit,the default setting is in low speed with light LED .Press
1st time,it’s 2nd speed with lighter LED;Press 2nd time,it’s 3rd speed with
lightest LED; Press 3rd time,it’s returning to 1st speed with light LED.
Remark:There’s memory function.Turn on the unit again to back to the last
speed after turning off. If plug out the unit,then it’s back to the default setting
when turn on again.