User's Manual

3）DC inlet: DC power input socket.
4）MODE button: For switching between EFFECT mode, CCT mode and MENU.
5）Right knob: For selecting options and adjusting the color temperature under CCT mode.
6）Power switch: For switching on/off the fixture.
7）DMX inlet: For DMX input socket.
4、2.4G and Bluetooth Remote Control
The Forza 60B Ⅱ is able to be remotely controlled by 2.4G remote controller, or by NANLINK
APP via the WS-TB-1 transmitter box or via Bluetooth directly.
Note:
1）2.4G remote controller and transmitter box are sold separately.
2）The fixture supports the 2.4G wireless protocol V1.0 and V2.0. Please set fixture to V2.0 while
using WS-RC-C1 or WS-RC-C2 remote controller. Please set fixture to V1.0 while using other
remote controllers.
5、Safety Precautions
1）Please open the package to check for damage caused in transit, if damaged please do not use
and contact place of purchase or manufacturer as soon as possible.
2）Please do not use a power cord with damaged insulation, do not unplug too hard or drag the
power cord directly.
3）Make sure that the power supply voltage used matches the voltage designated by the light
before installation.
4）Please turn the light off when it is not in use or before cleaning.
5）Please keep the light safely stored and away from children.
6、Notice
1）Please take off the COB protective cap before using.
2）Please do not look directly at the emitter when the light is on .
3）Please wait 10 seconds to turn off the light fixture after any parameter setting in order to save
it for future use.
4）Please do not place any objects on the light emitter or allow liquid to flow inside the fixture or
the emitter.
5）Please do not place the light fixure near the flammable substances like alcohol or gasoline.
6）Please wipe off debris or dirt by using a cloth with clean water or neutral cleanser when
cleaning the light.
7）The fixture should be used in dry and ventilated place and avoid being used in damp, dusty or
overheated environment, also make sure the fan and the vents are not blocked or obstructed.
8）Any attempt to repair the fixture by yourself will void warranty, disasembling and repair can
only be allowed when trained professionals are involved under strict protocal regulated in this
manual.