User's Manual

Additional health and safety information
Health and Safety
Please do not use mobile phone around poor
signal or high accuracy electronic equipment.
Interference from radio wave may cause mis-
operation or other troubles for electronic
equipment. You need to pay more attention when
using the device around the following devices:
hearing aid, pacemaker and other medical
electronic devices, fire detector, automatic door
and other automatic control devices.
Please use this device under a -10 C~45 C
temperature and a 35%~85% humidity. When
using this device, try to keep away from normal
telephone, TV, radio and office automatic
equipment as far as you can in order not to
influence the performance of these equipments
and your device.
On rare occasions, using the device in some
vehicles may affect the electronic devices of the
car. On this occasion, please do not use the
device to avoid losing security guarantee.
When connecting the device or its accessories
to other devices, please read the user manual
and familiarize yourself with the safety
information. Do not connect to incompatible
products.
Please do not use the device if antenna is
damaged. Otherwise, it may cause personal
injure.
Do not place the device near magnetic card
or other magnetic objects, as information
stored in floppy disc, deposit card and
credit card might be corrupted by the
magnetic radiation from the device.
Please place drawing pin and other metallic
objects far away from phone receiver. As
there is a magnetic field when the speaker
is working, these small metallic objects
may be attracted to the device and personal
injury or phone damage may be caused.
Keep the device out of moisture, water or
other liquid, as it may cause overheat,
electric leakage and troubles.
37
Do not force the display or use it to beat
other objects. Otherwise, it may cause
display damage and liquid leakage of the
LCD. Please do not touch the display if the
glass over-plate is broken to avoid injury
to your finger by glass cullet or crack.
Please check your power on/off settings to
ensure that your mobile phone would not power
on automatically in the process.