User's Manual

2) Incoming calls
When there is a call from the visitor, a calling interface will pop up on the smart terminal. Users
can intercom with the visitor after the call is answered. (See the pictures below.)
·Unlock: Click the “Unlock” button to release the electric lock.
·Video recording: Click the “Video” button to start video recording, the recorded videos will be
saved on the smart terminals, click the “Video” button again to stop recording.
·Photo taking: Click the “Photos” button to take pictures by the device, the taken photos will be
saved on the smart terminal.
·End a call: Click “End a call” button to hang up the current call.
6 7
F. Records
1) Check the records
Click the “Record” button to enter the record page; you can check the calling record
information of each device. Slide the media player to check the photos and videos.(See
the picture below)
2) Delete Records
Click the “Cancel” button on the top right side, select the records you want to delete and
then click the delete button on the bottom right corner, click “ok” to delete the records.
(See the pictures below.)
1) Real time monitoring
Click the current device to enter the video intercom interface, it will start the talking and video
functions between users and outdoor unit. (Please see the pictures below.)
·Unlock: Click the “Unlock” button to release the electric lock.
·Video recording: Click the “Video” button to start video recording, the recorded videos will be
saved on the smart terminals, click the “Video” button again to stop recording.
·Photo taking: Click the “Photos” button to take pictures by the device, the taken photos will be
saved on the smart terminal.
·End a call: Click “End a call” button to hang up the current call.
E. Video Intercom
G. APP Settings
1) Ring Setting
Click “Setting” to enter the setting page, clicks “Ring” to set the doorbell ringtone and
alarm ringtone (see the pictures below), click the “√” button on the top right corner to save
the setting.